M009T80572 Mitsubishi Starter Motor 24V 8.5kW 12T

M009T80572 Heavy-Duty Starter Motor for MITSUBISHI FV515 (8DC93)

For warehouse planners reviewing customer demand, M009T80572 gives heavy-duty parts distributors, importers and fleet suppliers a defined aftermarket starter motor for MITSUBISHI FV515 (8DC93). The supplied version combines 24V, 8.5kW and 12T for OE-reference matching, wholesale quotation and repeat purchasing.

For importers building a new starter range, distributors can quote the exact application and starter configuration without turning the page into a generic component guide. Elecdura can also review customer labels, carton requirements and inspection documents for planned orders.

M009T80572 Starter Motor Specifications and Technical Drawing

For technical buyers evaluating a direct replacement, the 12T pinion and module 3.5 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For engine-parts specialists comparing the flange and terminals, the source-faithful technical drawing records the available mounting information for M009T80572, including 76.5±1 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M009T80572 Aftermarket Replacement and Application

For product managers checking repeat-order specifications, this aftermarket starter motor is organized around M009T80572 for MITSUBISHI FV515 (8DC93). Related numbers remain useful search and purchasing references, but Elecdura treats a changed rating, pinion, flange or terminal layout as a separate version for quotation.

For maintenance suppliers matching the starter being replaced, the removed unit should agree with the approved drive-end, side and rear views. Confirm the 12T pinion and module 3.5, then keep any different flange or terminal layout outside the current priced item.

M009T80572 Wholesale Supply for Distributors and Importers

For private-label buyers preparing distributor pricing, distributor supply for M009T80572 can include neutral packaging, customer-brand review and order-specific labels. Current commercial guidance is 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For purchasing teams opening a first distributor purchase, available quality support includes armature, solenoid, no-load and load testing. Buyers may define sampling, report format, reference labels, terminal protection and carton marks before production so the shipment can be checked against the approved order specification.

M009T80572 Starter Motor Buyer FAQ

What should receiving teams compare on M009T80572 rear-terminal photograph when the starter being replaced is available?

For application specialists matching the existing starter, use the rear view of M009T80572 to identify battery and signal terminals, their direction and the clearance around each stud. Match the customer's photograph from the same orientation and consider cable routing in MITSUBISHI FV515 (8DC93). A correct drive end with an unusable terminal position is not a complete fitment match.

What should receiving teams compare on M009T80572 ring-gear engagement when the old starter is available?

For replacement-parts sellers reviewing drive-end geometry, review the 12T pinion, module 3.5, rest position and available axial dimensions as one engagement set. Inspect the ring gear for wear before fitting. A correct bolt pattern cannot protect the gear if pitch or projection differs, so drive geometry should be resolved before the starter is energized.

What must be matched before quoting mounting-hole pattern when confirming the quote position?

For service-parts networks comparing nearby starter versions, A complete mounting-hole callout is not stated for M009T80572. Photograph the old flange straight on and provide hole count, bore diameter and center spacing from the same datum. Those measured points let purchasing separate close housings without transferring hole data from another starter or assuming that a similar silhouette will bolt in.

How should a workshop distinguish 24V system compatibility when preparing a product query?

For importers preparing a technical RFQ, M009T80572 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before stock is committed. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

What should receiving teams compare on M009T80572 order testing during an application review?

For inventory buyers defining label requirements, Elecdura can discuss armature, solenoid, no-load and load testing for M009T80572. State the required report format, sampling expectation and acceptance points in the RFQ. Testing should use the stated 24V and 8.5kW configuration, while identity and mounting checks remain separate because electrical results do not prove physical interchangeability.

How should a distributor confirm M009T80572 drive-end photograph when the original unit in hand is available?

For maintenance suppliers comparing the flange and terminals, the drive-end image for M009T80572 should be used to count 12 teeth and compare the flange, locating shoulder and pinion rest position. Use the same viewing angle when recording the unit taken from service. An uneven camera angle can mask the pinion and bolt positions; clear frontal framing supports a better replacement decision.

What evidence best identifies M009T80572 three-view gallery for a documented fitment decision?

For equipment-parts dealers reviewing a replacement proposal, use the drive-end view to compare the pinion and flange, the side profile to judge housing length and solenoid position, and the rear view to check terminals. All three images belong to M009T80572; they should be reviewed together with the 12T drive and MITSUBISHI FV515 (8DC93) application. Request an additional close-up when the customer's unit hides a deciding feature.

Which detail separates 76.5±1 mm for a first bulk order?

For purchasing teams confirming the stated application, use 76.5±1 mm when comparing M009T80572. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

Request a Wholesale Quote for M009T80572 Heavy-Duty Starter Motor

For distributors confirming an incoming batch, send M009T80572, ME164620, the MITSUBISHI FV515 (8DC93) application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 8.5kW, 12T version and prepare a product-specific wholesale quotation.