M008T75171-12V-2.2KW-10T-3M Mitsubishi Starter Motor

M008T75171-12V-2.2KW-10T-3M Heavy-Duty Starter Motor for MITSUBISHI S4S

For purchasing teams preparing a volume quote, M008T75171-12V-2.2KW-10T-3M supports commercial and off-highway replacement programs for MITSUBISHI S4S. This heavy-duty starter motor is defined by its 12V electrical system, 2.2kW output and 10T pinion, giving distributors a practical basis for quotation and stock matching.

For distributors planning a repeat order, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

M008T75171-12V-2.2KW-10T-3M Starter Motor Specifications and Technical Drawing

For application specialists matching the starter removed from the machine, this reference group can cover nearby starter versions. Keep M008T75171-12V-2.2KW-10T-3M, 12V, 2.2kW and 10T together on the RFQ, then compare the flange, drive end and terminal layout before treating another number as a direct replacement.

For replacement-parts sellers reviewing drive-end geometry, the source-faithful technical drawing records the available mounting information for M008T75171-12V-2.2KW-10T-3M, including 2×Ø8, Ø115, 21.5 mm; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M008T75171-12V-2.2KW-10T-3M Aftermarket Replacement and Application

For technical buyers reviewing a replacement proposal, send M008T75171-12V-2.2KW-10T-3M, M008T75171, M008T70371, the full MITSUBISHI S4S description and photos of the starter being removed. These details allow the quotation to stay product-specific when related numbers appear on more than one housing version.

For engine-parts specialists confirming the stated application, the unit taken from service should agree with the approved drive-end, side and rear views. Confirm the 10T pinion and module 3, then keep any different flange or terminal layout outside the current quotation line.

M008T75171-12V-2.2KW-10T-3M Wholesale Supply for Distributors and Importers

For regional parts suppliers reviewing customer demand, Elecdura supports repeat-order and new-line sourcing for M008T75171-12V-2.2KW-10T-3M. Commercial planning can cover a 20 pcs MOQ, 7–15 day lead time subject to confirmation, neutral packaging or private-label review, and an 18-month agreed warranty.

For aftermarket wholesalers building a new starter range, Elecdura can align product identification, electrical testing and packaging records with the buyer's order. The exact inspection scope depends on the agreed quantity and market requirements and should be stated before production planning.

M008T75171-12V-2.2KW-10T-3M Starter Motor Buyer FAQ

Which comparison prevents a mismatch for 21.5 mm when the starter being replaced is available?

For maintenance suppliers confirming the stated application, use 21.5 mm when comparing M008T75171-12V-2.2KW-10T-3M. Measure from the drawing's indicated faces and keep pinion rest position separate from overall body length. These axial values influence how the drive sits and engages, so the set should agree with the removed starter before a fleet or distributor quantity is released.

Which specification deserves priority for M008T75171-12V-2.2KW-10T-3M drawing dimensions before stock is assigned?

For equipment-parts dealers checking application evidence, read the M008T75171-12V-2.2KW-10T-3M drawing as a comparison aid, not as permission to ignore the starter being replaced. Check every visible diameter, hole callout, length and angle that affects seating or engagement, then confirm the terminal view from the product photos. The drawing is schematic and not to scale, so decisions must follow the printed values rather than a visual estimate from the image.

Which check should lead M008T75171-12V-2.2KW-10T-3M cartons and units before an installation slot is booked?

For purchasing teams building a new starter range, sample cartons from different positions in the shipment and compare the M008T75171-12V-2.2KW-10T-3M labels, 12V marking, 10-tooth pinion, flange shape and terminal protection with the PO specification. Photograph any mixed marking, damaged terminal or different drive end during the pre-fit check, and isolate those pieces so the rest of the lot can be assessed consistently.

How should a workshop distinguish M008T75171-12V-2.2KW-10T-3M locating face for a documented fitment decision?

For distributors separating similar housings, the M008T75171-12V-2.2KW-10T-3M flange should sit flat against the MITSUBISHI S4S mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

What evidence best identifies M008T75171-12V-2.2KW-10T-3M side-profile photograph when several versions look alike?

For technical buyers matching the starter being replaced, the side profile of M008T75171-12V-2.2KW-10T-3M shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use 21.5 mm where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Which detail separates module 3 for a first wholesale order?

For engine-parts specialists reviewing drive-end geometry, module 3 is part of the gear geometry for M008T75171-12V-2.2KW-10T-3M. Confirm it together with the 10-tooth count and pinion diameter; another module changes tooth pitch even when the number of teeth is unchanged. The old starter or ring-gear specification should therefore support the module match before a substitute is accepted.

How can a buyer screen M008T75171-12V-2.2KW-10T-3M, M008T75171, M008T70371 for warehouse identification?

For fleet-parts buyers comparing nearby starter versions, M008T75171-12V-2.2KW-10T-3M, M008T75171, M008T70371 should be treated as one inquiry group only after the real component is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate priced item instead of assuming that the shared number guarantees interchangeability.

How can an importer validate M008T75171-12V-2.2KW-10T-3M among Mitsubishi versions for a first distributor purchase?

For technical sales teams preparing a technical RFQ, M008T75171-12V-2.2KW-10T-3M should remain separate from another Mitsubishi starter whenever voltage, output, tooth count, module, flange geometry or terminal position changes. For this line, retain 12V, 2.2kW and 10T together in the purchasing description. That specification bundle gives sales, warehouse and technical teams one consistent basis for reviewing alternatives.

Request a Wholesale Quote for M008T75171-12V-2.2KW-10T-3M Heavy-Duty Starter Motor

For sourcing managers setting packaging requirements, prepare the RFQ with M008T75171-12V-2.2KW-10T-3M, M008T75171, M008T70371, the complete application, quantity, target delivery and packaging requirements. We will respond with the defined 12V 2.2kW 10T starter motor line rather than a generic substitute.