M008T87171 Mitsubishi Starter Motor 24V 5.0kW 11T

M008T87171 Heavy-Duty Starter Motor for MITSUBISHI 6D34

For private-label buyers preparing a volume quote, this aftermarket heavy-duty starter motor is specified for MITSUBISHI 6D34 with 24V, 5.0kW and 11T. The page keeps the replacement identity, technical definition and wholesale order information in one place.

For purchasing teams planning a repeat order, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

M008T87171 Starter Motor Specifications and Technical Drawing

For fitment reviewers matching the old starter, the key version difference is the mounting and housing clocking. Compare 170° and 2×Ø12.5 with the existing starter so the pinion alignment and cable access remain correct.

For application specialists reviewing drive-end geometry, the source-faithful technical drawing records the available mounting information for M008T87171, including 2×Ø12.5, 170°; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

M008T87171 Aftermarket Replacement and Application

For distributors checking repeat-order specifications, MITSUBISHI 6D34 is the stated application for M008T87171. Buyers comparing M008T87171, 049303 should confirm that the existing starter shares the same 24V system, 5.0kW output and 11T drive before adding the item to a distributor order.

For technical buyers confirming the stated application, before a purchase order is released, compare the removed starter's mounting face, 11T drive and terminal direction with the approved gallery. Module 3 is part of the pinion definition. Any conflicting physical feature should remain on a separate RFQ line until the correct replacement is confirmed.

M008T87171 Wholesale Supply for Distributors and Importers

For engine-parts specialists reviewing customer demand, wholesale enquiries for M008T87171 can combine product matching with packaging and inspection planning. Elecdura offers neutral packaging and private-label review for qualified orders, with 20 pcs MOQ, 7–15 days subject to confirmation and an 18-month warranty under agreed terms.

For regional parts suppliers building a new starter range, batch consistency should be controlled through the agreed reference, electrical rating, pinion, packaging and inspection points. Elecdura can discuss test documentation and pre-shipment photos that match the needs of the distributor or importer.

M008T87171 Starter Motor Buyer FAQ

Which comparison prevents a mismatch for 5.0kW output on MITSUBISHI 6D34 when checking a replacement proposal?

For product managers confirming the stated application, the 5.0kW rating belongs to the M008T87171 configuration used for MITSUBISHI 6D34. Verify the old-unit rating and investigate battery voltage, cable drop and engine turning resistance before choosing another output. A higher or lower kW figure is not an automatic upgrade; it can indicate a separate starter design with different electrical and mechanical requirements.

How should a workshop distinguish 24V system compatibility before accepting a substitute?

For maintenance suppliers checking application evidence, M008T87171 is a 24V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before stock is committed. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

How should a workshop distinguish MITSUBISHI 6D34 previously replaced starter when confirming the RFQ entry?

For equipment-parts dealers preparing an OE-based quote, ask whether the starter removed from MITSUBISHI 6D34 is original or an earlier replacement. If it has been substituted before, the visible unit may not represent the equipment's initial build. Use its label and geometry together with M008T87171, 24V, 5.0kW and 11T before turning that history into a bulk stocking decision.

Which specification deserves priority for M008T87171 terminal access for a documented fitment decision?

For purchasing teams separating similar housings, compare the rear housing and terminal direction in the approved product views for M008T87171. The battery cable and start-signal lead must reach without sharp bends, rubbing or contact with hot and moving parts. If the body can be clocked differently within the same reference family, confirm the actual terminal position before stock is committed to the order.

Which detail separates axial reach when the original unit in hand is available?

For distributors evaluating a direct replacement, the source drawing does not provide a complete axial length for M008T87171. Ask for measured pinion rest position, flange-to-drive distance and a square side photograph of the old unit. Keep those customer measurements with the 11T drive definition so an unstated length is not borrowed from a neighboring reference.

How should a workshop distinguish M008T87171 inside a mixed starter shipment for a first commercial order?

For aftermarket product managers preparing distributor pricing, give each carton line its own reference, 24V, 5.0kW and 11T marking. The packing list should preserve those same fields. Receiving can then compare labels and drive-end appearance without opening every carton, while any mixed or unclear unit is isolated for review.

How should a distributor confirm M008T87171 technical claim evidence before stock is assigned?

For engine-parts specialists opening a first trade order, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the MITSUBISHI 6D34 equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

What should receiving teams compare on MITSUBISHI 6D34 cranking condition for warehouse identification?

For fleet-parts buyers preparing a technical RFQ, before replacing the starter on MITSUBISHI 6D34, test battery state, voltage drop across positive and ground paths, the start signal and ring-gear condition. Note cranking voltage and any abnormal noise. Those observations help distinguish a supply-circuit or engine-load problem from a fault in the 24V, 5.0kW starter and make a fitment check easier to resolve.

Request a Wholesale Quote for M008T87171 Heavy-Duty Starter Motor

For aftermarket wholesalers requesting production pricing, send M008T87171, 049303, the MITSUBISHI 6D34 application, required quantity, destination and packaging preference. Add old-unit photos when available. Elecdura will review the 24V, 5.0kW, 11T version and prepare a product-specific wholesale quotation.