428000-8760 John Deere Starter Motor 12V 3.0kW 13T

428000-8760 John Deere Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of 428000-8760 starts with the 12V, 3.0kW, 13-tooth clockwise configuration and the stated use in John Deere vehicles and equipment cross-referenced to 428000-8760. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

428000-8760 should enter a wholesale catalog only after the buyer links 428000-8760 / DSN2094 / Re531501 / 256297D / 190-90127 to John Deere vehicles and equipment cross-referenced to 428000-8760 and a verified sample. Record the mounting pattern, pinion reach, terminal clocking and rating label alongside the commercial terms. When another factory quotes the line, compare that complete record first; a lower price on an adjacent version does not represent the same purchasing outcome.

428000-8760 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 428000-8760.

428000-8760 Starter Motor Distributor Specifications for Aftermarket Buyers

428000-8760 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 428000-8760 as the primary purchasing reference and cross-check DSN2094, Re531501, 256297D, 190-90127. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

428000-8760 Starter Motor Bulk Fitment Approval for Wholesale Supply

Before accepting 428000-8760 as a replacement, obtain the full vehicle, machine or engine record and compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

428000-8760 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

Receiving control should link the carton, unit label and inspection sample to 428000-8760. Verify rating label, tooth count, mounting face, corrosion protection, terminals and lot marking; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

428000-8760 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

428000-8760 Starter Motor Distributor FAQ for B2B Supply

How should a distributor request B2B pricing for 428000-8760?

Send 428000-8760 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for 428000-8760 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the signed-off sample with 428000-8760, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for 428000-8760 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair 428000-8760 warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which reference numbers should buyers confirm for 428000-8760?

Use 428000-8760 as the control reference and cross-check DSN2094, Re531501, 256297D, 190-90127. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 428000-8760 starter motor?

The specified application is John Deere vehicles and equipment cross-referenced to 428000-8760. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Which electrical and drive specifications define 428000-8760?

The specified configuration is 12V, 3.0kW, 13-tooth clockwise configuration. Voltage must match the electrical system, while power, tooth count and rotation affect cranking performance and ring-gear engagement. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for 428000-8760?

Confirm the complete 428000-8760 / DSN2094 / Re531501 / 256297D / 190-90127 group together with the 12V, 3.0kW, 13-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What physical fitment checks are required for 428000-8760?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Request a B2B Quote for 428000-8760 Starter Motors

Send the complete reference, John Deere vehicles and equipment cross-referenced to 428000-8760, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.