Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
65.26201-7078B
65.26201-7078B
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
65.26201-7078B
Doosan DH225-7; 12V, 3.0kW, 11T, 40mm pinion reference
Confirm 11T pinion and 40mm reference, mounting face, drive reach and terminal orientation, 12V, 3.0kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
This 65.26201-7078B product line for Doosan DH225-7 is aimed at B2B buyers handling starter demand. The 12V, 3.0kW, 11T specification helps separate this configuration from related units when several similar starters pass through the same parts counter.
Machine-repair contractor teams handling repeat-lot review should send 65.26201-7078B, the Doosan DH225-7 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.
| Primary order identity | 65.26201-7078B |
| Target application | Doosan DH225-7 |
| Starter design | application-specific replacement |
| System voltage | 12V |
| Rated output | 3.0kW |
| Pinion identification | 11T / 40mm reference |
| OE / reference group | 65.26201-7078B |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
A practical distributor check records 11T pinion and 40mm reference, mounting face, drive reach and terminal orientation before the sample enters stock. Add a view of the flange depth and pinion reach so sales staff can answer later enquiries from documented dimensions rather than an assumption based on the general starter family.
Keep the listed 12V system and 3.0kW rating beside the 11T drive on the order. Before installation, inspect cable condition, grounds and ring-gear teeth; external resistance or mechanical drag can otherwise be mistaken for a starter problem.
Purchasing records should preserve 65.26201-7078B with the Doosan DH225-7 application. Alternate numbers can support a search, but they should not replace the main line until the complete physical and electrical specification agrees; uncertain alternatives are clearer when quoted as separate items.
For repeat-lot review, keep 65.26201-7078B, Doosan DH225-7, 12V, 3.0kW and 11T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the machine-repair contractor a documented basis for clear lot-to-lot comparison when the next order is raised.
Wholesale buyers may combine an initial verification order with a forward replenishment plan, provided each reference remains clearly separated. Normal terms are MOQ 20 pieces, 7–15 days after confirmation and an 18-month warranty; packing and freight are quoted for the stated destination.
Demand from a regional machine dealer should keep 65.26201-7078B tied to Doosan DH225-7. For repeat-lot review, the machine-repair contractor can use a machine-down contingency stock, archive the carton and lot label and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping mixed-SKU export packing visible.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the 65.26201-7078B order should still be based on the listed application, electrical data and physical unit checks.
Machine-repair contractor teams should tie 65.26201-7078B to Doosan DH225-7, 12V, 3.0kW, 11T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address mixed-SKU export packing and clear lot-to-lot comparison in the same quotation.
Send the complete 65.26201-7078B reference, Doosan DH225-7 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 3.0kW 11T unit, packing, lead time and freight in one focused offer. Keep 65.26201-7078B traceable through repeat-lot review.
Check the machine electrical system, old-starter label and service record before ordering. Keep 3.0kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Keep 65.26201-7078B traceable through repeat-lot review.
Provide the invoice or lot reference, installation date, Doosan DH225-7 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. File 65.26201-7078B with the old-unit photo linkage check.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Keep 65.26201-7078B traceable through repeat-lot review.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Carry the 65.26201-7078B result into mixed-SKU export packing.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Doosan DH225-7, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Link 65.26201-7078B photographs to the old-unit photo linkage record.
Compare 11T pinion and 40mm reference, mounting face, drive reach and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File 65.26201-7078B with the old-unit photo linkage check.
Email info@elecdurauto.com with 65.26201-7078B, Doosan DH225-7 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 3.0kW 11T offer, availability, packing, lead time and freight options.
