Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Doosan DH300 24V 5.5kW
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Doosan DH300; 24V, 5.5kW, 11T, 40 mm pinion reference
Confirm 11T pinion, 40 mm reference, three-hole mounting face and cable access, 24V, 5.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
This Doosan DH300 24V 5.5kW product line is aimed at B2B buyers handling starter demand. The 24V, 5.5kW, 11T specification helps separate this configuration from related units when several similar starters pass through the same parts counter.
Importers should place Doosan DH300 24V 5.5kW, Doosan DH300, requested quantity and delivery location on the same enquiry line. A readable old-unit label plus mounting-face and terminal photographs reduces back-and-forth and helps the quotation cover the intended unit rather than several similar candidates.
| Primary order identity | Doosan DH300 24V 5.5kW |
| Target application | Doosan DH300 |
| Starter design | application-and-specification-controlled excavator replacement |
| System voltage | 24V |
| Rated output | 5.5kW |
| Pinion identification | 11T / 40 mm reference |
| OE / reference group | Application and physical unit details |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
The key fit controls are 11T pinion, 40 mm reference, three-hole mounting face and cable access. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.
Alongside the mounting comparison, verify 24V, 5.5kW, 11T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.
On cartons, purchase orders and customer quotations, retain the complete Doosan DH300 24V 5.5kW string. Where Application and physical unit details is also supplied, show each number in full rather than compressing them into one broad interchange statement; the application and unit still require a complete match.
For this excavator requirement, purchasing teams should use a removed-unit photo set and machine plate for sample confirmation before volume supply. Keep the confirmed Doosan DH300 details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.
Buyers can request neutral packing or discuss private-label presentation for suitable volumes. The usual minimum is 20 pieces and lead time is normally 7–15 days after confirmation, while freight options are selected from the destination, carton quantity and required arrival date.
A distributor can reduce slow-moving stock by keeping Doosan DH300 24V 5.5kW tied to its Doosan DH300 customer base. Review demand frequency, service geography and emergency freight cost before choosing the balance between central stock and local availability.
This video shows Elecdura production and electrical-testing capability for starter-motor supply. It supports supplier evaluation; the Doosan DH300 24V 5.5kW order should still be based on the listed application, electrical data and physical unit checks.
Provide the invoice or lot reference, installation date, Doosan DH300 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Record the Doosan DH300 24V 5.5kW outcome beside the Doosan DH300 application and received lot.
Check the machine electrical system, old-starter label and service record before ordering. Keep 5.5kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Apply the result to the Doosan DH300 24V 5.5kW Doosan DH300 line rather than an unrelated starter family.
Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Doosan DH300 inventory. This keeps the check specific to Doosan DH300 24V 5.5kW, not the general housing family.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This keeps the check specific to Doosan DH300 24V 5.5kW, not the general housing family.
No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40 mm reference, solenoid position, terminals and 24V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Retain the 5.5kW 11T specification with the Doosan DH300 24V 5.5kW decision.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Keep the confirmed photographs with Doosan DH300 24V 5.5kW for future receiving checks.
The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Doosan DH300, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. Record the Doosan DH300 24V 5.5kW outcome beside the Doosan DH300 application and received lot.
Send the complete Doosan DH300 24V 5.5kW reference, Doosan DH300 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 5.5kW 11T unit, packing, lead time and freight in one focused offer. Use the same Doosan DH300 24V 5.5kW record when the next Doosan DH300 order is raised.
Email info@elecdurauto.com with Doosan DH300 24V 5.5kW, Doosan DH300 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 5.5kW 11T offer, availability, packing, lead time and freight options.
