Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Iveco 24V 4.5kW 10T 40mm
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Iveco; 24V, 4.5kW, 10T, 40mm pinion reference
Confirm 10T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation, 24V, 4.5kW, solenoid position and terminal layout against the removed starter before volume supply.
| Quantity: | |
|---|---|
The Iveco 24V 4.5kW 10T 40mm starter for Iveco is intended for replacement demand. It combines 24V, 4.5kW output with the 10T drive, allowing B2B buyers to keep the quotation tied to one application and physical configuration rather than a broad visual description.
Import distributor teams handling scheduled stock refill should send Iveco 24V 4.5kW 10T 40mm, the Iveco record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address more reliable receiving checks, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.
| Primary order identity | Iveco 24V 4.5kW 10T 40mm |
| Target application | Iveco |
| Starter design | application-matched replacement |
| System voltage | 24V |
| Rated output | 4.5kW |
| Pinion identification | 10T / 40mm reference |
| OE / reference group | Application and physical unit details |
| Wholesale terms | MOQ 20 pcs / normally 7–15 days after order confirmation |
| Warranty | 18 months under agreed sales terms |
Compare 10T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.
Alongside the mounting comparison, verify 24V, 4.5kW, 10T and the position of each connection. The combination provides a much safer purchasing identity than a single cross-reference, particularly for distributors supporting several engine or machine families.
When a buyer provides Application and physical unit details, record whether the reference came from a label, invoice or service record, and keep the complete Iveco 24V 4.5kW 10T 40mm format on the quotation. The final choice must also agree with the actual application and physical unit.
For scheduled stock refill, keep Iveco 24V 4.5kW 10T 40mm, Iveco, 24V, 4.5kW and 10T on one purchasing record. At goods-in, review voltage marking and battery setup before releasing the lot. This gives the import distributor a documented basis for more reliable receiving checks when the next order is raised.
Elecdura works with importers, parts distributors, rebuilders and fleet-service businesses. A typical order starts at 20 pieces and takes 7–15 days after confirmation, with neutral packaging, private-label review and an 18-month warranty available under the final commercial agreement.
Demand from a branch service counter should keep Iveco 24V 4.5kW 10T 40mm tied to Iveco. For scheduled stock refill, the import distributor can use a branch-specific reorder point, record the removed-unit dimensions and review voltage marking and battery setup at goods-in. This supports more reliable receiving checks while keeping sample-to-bulk scheduling visible.
Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep Iveco 24V 4.5kW 10T 40mm, Iveco and the confirmed physical configuration on the quotation.
Import distributor teams should tie Iveco 24V 4.5kW 10T 40mm to Iveco, 24V, 4.5kW, 10T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review voltage marking and battery setup. Ask Elecdura to address sample-to-bulk scheduling and more reliable receiving checks in the same quotation.
Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Retain Iveco 24V 4.5kW 10T 40mm for more reliable receiving checks and receiving review.
Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain the Iveco 24V 4.5kW 10T 40mm result for scheduled stock refill.
Compare 10T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File Iveco 24V 4.5kW 10T 40mm with the voltage marking and battery setup check.
Use the full reference, Iveco application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Use Iveco 24V 4.5kW 10T 40mm when arranging sample-to-bulk scheduling.
Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. This supports more reliable receiving checks for Iveco 24V 4.5kW 10T 40mm.
A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep Iveco 24V 4.5kW 10T 40mm traceable through scheduled stock refill.
Use active Iveco customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Link Iveco 24V 4.5kW 10T 40mm photographs to the voltage marking and battery setup record.
Email info@elecdurauto.com with Iveco 24V 4.5kW 10T 40mm, Iveco details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 4.5kW 10T offer, availability, packing, lead time and freight options.
