M2T56272 Mitsubishi K4D 12V 2.0kW Starter Motor Distributor Supply

M2T56272 Mitsubishi K4D Starter Motor B2B Purchasing Overview

For workshops and distributors serving Mitsubishi K4D, M2T56272 provides a defined 12V, 2.0kW, 13T purchasing reference. Its role is practical: it provides Mitsubishi K4D buyers with a controlled 13T replacement line for sample-to-volume purchasing, while quotation details remain tied to the actual engine or machine being serviced.

Service network teams handling seasonal service should send M2T56272, the Mitsubishi K4D record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address shorter machine downtime, branch-ready labels and the correct physical configuration in one useful commercial offer.

M2T56272 Starter Motor Specifications for B2B Orders

Ask the workshop to photograph 13T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation without perspective distortion. The same photo set should show the mounting register and the pinion position relative to the flange; these points determine whether a starter that looks similar can actually seat and engage correctly.

Confirm the machine system as 12V and retain the 2.0kW, 13T specification on the RFQ. Check that the main cable and control lead can reach their studs without tight bends or interference, especially where the starter sits close to engine or frame components.

M2T56272 Starter Motor Reference Management for B2B Purchasing

Purchasing records should preserve M2T56272 with the Mitsubishi K4D application. Alternate numbers can support a search, but they should not replace the main line until the complete physical and electrical specification agrees; uncertain alternatives are clearer when quoted as separate items.

For seasonal service, keep M2T56272, Mitsubishi K4D, 12V, 2.0kW and 13T on one purchasing record. At goods-in, review flange and locating-register fit before releasing the lot. This gives the service network a documented basis for shorter machine downtime when the next order is raised.

M2T56272 Starter Motor Wholesale Terms and Supply Support

Commercial supply can cover evaluation quantities, repeat distributor stock and planned fleet demand. Standard terms start at 20 pieces with a normal 7–15-day lead time after confirmation; packaging, labels, warranty documentation and freight are aligned with the destination and order plan.

Demand from a diesel rebuild bench should keep M2T56272 tied to Mitsubishi K4D. For seasonal service, the service network can use a fast-moving counter stock, retain the accepted sample photographs and review flange and locating-register fit at goods-in. This supports shorter machine downtime while keeping branch-ready labels visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep M2T56272, Mitsubishi K4D and the confirmed physical configuration on the quotation.

M2T56272 Mitsubishi K4D Starter Motor FAQs

How can a service network source M2T56272 for seasonal service?

Service network teams should tie M2T56272 to Mitsubishi K4D, 12V, 2.0kW, 13T and the removed-unit photographs before requesting price. For seasonal service, state quantity, destination and delivery timing, then review flange and locating-register fit. Ask Elecdura to address branch-ready labels and shorter machine downtime in the same quotation.

Shorter machine downtime: When is a sample order useful for M2T56272?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep M2T56272 traceable through seasonal service.

For branch-ready labels, how should 12V be confirmed for M2T56272?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.0kW, 13T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Link M2T56272 photographs to the flange and locating-register fit record.

For seasonal service handled by a service network, how can workshops photograph M2T56272 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Carry the M2T56272 result into branch-ready labels.

For branch-ready labels, how can a distributor plan stock for M2T56272?

Use active Mitsubishi K4D customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain M2T56272 for shorter machine downtime and receiving review.

Shorter machine downtime: What should a buyer include in the M2T56272 quotation request?

Send the complete M2T56272 reference, Mitsubishi K4D details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.0kW 13T unit, packing, lead time and freight in one focused offer. Retain the M2T56272 result for seasonal service.

To support shorter machine downtime, why should Mitsubishi K4D stay on the M2T56272 order line?

The application gives purchasing and receiving teams context that a reference alone may not provide. Keeping Mitsubishi K4D, the electrical rating, pinion and confirmed photographs together makes repeat ordering clearer and reduces the chance that a visually related starter from another machine or engine family is substituted. File M2T56272 with the flange and locating-register fit check.

Shorter machine downtime: What should receiving staff inspect on the M2T56272 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Mitsubishi K4D inventory. Use M2T56272 when arranging branch-ready labels.

Contact Elecdura for M2T56272 Starter Motor Pricing

Email info@elecdurauto.com with M2T56272, Mitsubishi K4D details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.0kW 13T offer, availability, packing, lead time and freight options.