M2T56471 Mitsubishi FD28 12V 2.2kW Starter Motor Bulk Supply

M2T56471 Mitsubishi FD28 Starter Motor B2B Purchasing Overview

Mitsubishi FD28 parts buyers can quote M2T56471 in the Mitsubishi-type replacement configuration with 12V, 2.2kW and 11T. The combination matters because it helps Mitsubishi FD28 service buyers control a 11T configuration before it enters mixed-reference warehouse stock; it also gives sales and warehouse teams one consistent description for samples, bulk orders and reorders.

Fleet workshop teams handling scheduled stock refill should send M2T56471, the Mitsubishi FD28 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address traceable repeat purchasing, single-reference cartons and the correct physical configuration in one useful commercial offer.

M2T56471 Starter Motor Specifications for B2B Orders

Start the physical comparison with 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Use a straight view of the mounting face and a side view parallel to the shaft so perspective does not hide the flange-to-pinion relationship. A close body shape, paint color or solenoid size is not enough to establish interchangeability.

Before ordering, the buyer should verify 12V, 2.2kW output, 11T pinion and terminal arrangement. Keeping these points together helps warehouse and sales teams avoid switching a similar-looking unit into the Mitsubishi FD28 order.

M2T56471 Starter Motor OE Reference Control for B2B Orders

The reference line for this product is M2T56471. Do not shorten punctuation or merge it with a neighboring family in the ERP; retain Mitsubishi FD28 and the core specification beside it so sales, purchasing and receiving teams are working from the same item identity.

For scheduled stock refill, keep M2T56471, Mitsubishi FD28, 12V, 2.2kW and 11T on one purchasing record. At goods-in, review pinion reach and engagement before releasing the lot. This gives the fleet workshop a documented basis for traceable repeat purchasing when the next order is raised.

M2T56471 Starter Motor Distributor Packing and Stock Planning

Commercial supply can cover evaluation quantities, repeat distributor stock and planned fleet demand. Standard terms start at 20 pieces with a normal 7–15-day lead time after confirmation; packaging, labels, warranty documentation and freight are aligned with the destination and order plan.

Demand from a regional engine-parts branch should keep M2T56471 tied to Mitsubishi FD28. For scheduled stock refill, the fleet workshop can use a consolidated export lot, store the pinion-side receiving image and review pinion reach and engagement at goods-in. This supports traceable repeat purchasing while keeping single-reference cartons visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the M2T56471 application and specification shown above for their own product comparison.

M2T56471 Mitsubishi FD28 Starter Motor FAQs

How can a fleet workshop source M2T56471 for scheduled stock refill?

Fleet workshop teams should tie M2T56471 to Mitsubishi FD28, 12V, 2.2kW, 11T and the removed-unit photographs before requesting price. For scheduled stock refill, state quantity, destination and delivery timing, then review pinion reach and engagement. Ask Elecdura to address single-reference cartons and traceable repeat purchasing in the same quotation.

Fleet workshop receiving review: When is a sample order useful for M2T56471?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Use M2T56471 when arranging single-reference cartons.

Single-reference cartons question: How can a distributor plan stock for M2T56471?

Use active Mitsubishi FD28 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. This supports traceable repeat purchasing for M2T56471.

Fleet workshop receiving review: Is a matching 11T pinion enough to approve M2T56471?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 40mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. Keep M2T56471 traceable through scheduled stock refill.

Pinion reach and engagement check: What should be checked before installing the M2T56471 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Link M2T56471 photographs to the pinion reach and engagement record.

To support traceable repeat purchasing, what lead-time details should be stated for the M2T56471 order?

Tell Elecdura the quantity, destination, required arrival date and whether the demand supports an urgent repair, normal replenishment or a planned project. Normal preparation is 7–15 days after confirmation, but freight and packing choices depend on the actual schedule and shipment size. Carry the M2T56471 result into single-reference cartons.

Fleet workshop receiving review: Can M2T56471 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain M2T56471 for traceable repeat purchasing and receiving review.

Single-reference cartons question: How can workshops photograph M2T56471 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain the M2T56471 result for scheduled stock refill.

Send M2T56471 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with M2T56471, Mitsubishi FD28 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 11T offer, availability, packing, lead time and freight options.