M2T78681 Nissan FD42 24V 3.7kW Starter Motor Distributor Supply

M2T78681 Nissan FD42 Starter Motor Wholesale Procurement

M2T78681 supports commercial sourcing for Nissan FD42 with the Mitsubishi-type replacement design. Buyers receive a clear 24V, 3.7kW and 11T specification that can be checked against the removed unit before quantity, packing and freight are finalized.

Machine-repair contractor teams handling first-order sourcing should send M2T78681, the Nissan FD42 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address a controlled first sample, destination-specific packing and the correct physical configuration in one useful commercial offer.

M2T78681 Starter Motor Specifications for B2B Orders

The key fit controls are 11T pinion and 40mm reference, mounting face, drive reach, solenoid position and terminal orientation. Compare them as one geometry set, then check the locating face and drive projection against the removed starter. This is more reliable than matching one bolt hole or using an angled marketplace photograph.

For technical sign-off, compare the stated 24V, 3.7kW and 11T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

M2T78681 Starter Motor Distributor Reorder Identification

When a buyer provides M2T78681, record whether the reference came from a label, invoice or service record, and keep the complete M2T78681 format on the quotation. The final choice must also agree with the actual application and physical unit.

For first-order sourcing, keep M2T78681, Nissan FD42, 24V, 3.7kW and 11T on one purchasing record. At goods-in, review label and reference traceability before releasing the lot. This gives the machine-repair contractor a documented basis for a controlled first sample when the next order is raised.

M2T78681 Starter Motor Distributor Packing and Stock Planning

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from a multi-brand powertrain warehouse should keep M2T78681 tied to Nissan FD42. For first-order sourcing, the machine-repair contractor can use a project-site reserve, link the machine plate to the item and review label and reference traceability at goods-in. This supports a controlled first sample while keeping destination-specific packing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep M2T78681, Nissan FD42 and the confirmed physical configuration on the quotation.

M2T78681 Nissan FD42 Starter Motor FAQs

How can a machine-repair contractor source M2T78681 for first-order sourcing?

Machine-repair contractor teams should tie M2T78681 to Nissan FD42, 24V, 3.7kW, 11T and the removed-unit photographs before requesting price. For first-order sourcing, state quantity, destination and delivery timing, then review label and reference traceability. Ask Elecdura to address destination-specific packing and a controlled first sample in the same quotation.

Destination-specific packing question: When is a sample order useful for M2T78681?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. This supports a controlled first sample for M2T78681.

A controlled first sample: How can a distributor plan stock for M2T78681?

Use active Nissan FD42 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Keep M2T78681 traceable through first-order sourcing.

For destination-specific packing, what should receiving staff inspect on the M2T78681 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Nissan FD42 inventory. Link M2T78681 photographs to the label and reference traceability record.

Machine-repair contractor receiving review: How should alternate references for M2T78681 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Carry the M2T78681 result into destination-specific packing.

A controlled first sample: What should be checked before installing the M2T78681 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain M2T78681 for a controlled first sample and receiving review.

Destination-specific packing question: Can M2T78681 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Retain the M2T78681 result for first-order sourcing.

A controlled first sample: How can workshops photograph M2T78681 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. File M2T78681 with the label and reference traceability check.

Ask for M2T78681 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with M2T78681, Nissan FD42 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 3.7kW 11T offer, availability, packing, lead time and freight options.