M4T95478 Caterpillar 926 Starter Motor Wholesale Supply

M4T95478 Caterpillar 926 Starter Motor for Wholesale Buyers

M4T95478 Caterpillar 926 Starter Motor Wholesale Supply gives B2B teams a defined Caterpillar 926 line for sample, wholesale and replenishment enquiries. The listed 24V, 6.0kW, 15T configuration targets Caterpillar 926 loader service with a distinctive 15T drive that warrants its own warehouse line. Buyers can keep the complete reference and application together when requesting price, packing and delivery terms.

Before volume pricing is requested, place M4T95478 and the exact Caterpillar 926 record on one RFQ line. Add old-unit views, quantity, destination and whether the demand is a trial, scheduled replenishment or machine-down order; that distinction helps align availability and transport with the buyer's real priority.

M4T95478 Caterpillar 926 Technical Match and Fitment Checks

Ask the workshop to photograph 15T pinion, 56 mm reference, mounting ears and drive projection without perspective distortion. The same photo set should show the mounting register and the pinion position relative to the flange; these points determine whether a starter that looks similar can actually seat and engage correctly.

Electrical identity and mechanical fit must agree. Verify 24V, the 6.0kW rating and terminal layout, then count the 15 pinion teeth. A correct flange with the wrong system voltage, output or cable position is not an acceptable substitute.

M4T95478 Caterpillar 926 Reference Control for Distributors

M4T95478 should remain the lead reference for this Caterpillar 926 line. Cross-references are useful for discovery, but the buyer should accept them only after the 24V, 6.0kW, 15T, mounting and terminal details agree with the removed starter.

For this wheel-loader requirement, purchasing teams should help loader specialists order by complete Mitsubishi and Caterpillar reference group. Keep the confirmed Caterpillar 926 details, product photographs and received lot beside the item record so a later order can be compared with the same physical and commercial reference.

M4T95478 Wholesale Packaging and Replenishment Support

The wholesale offer is built around confirmed product identity, quantity and destination. Standard orders begin at 20 pieces, preparation is normally 7–15 days, and the 18-month warranty follows the agreed sales terms; export packing and label needs are stated before production or allocation.

For repeat orders, compare the confirmed lot with actual sell-through and workshop demand. Since this starter targets Caterpillar 926 loader service with a distinctive 15T drive that warrants its own warehouse line, the safest stock decision is usually a defined reorder point plus a separate allowance for breakdown or project work.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep M4T95478, Caterpillar 926 and the confirmed physical configuration on the quotation.

M4T95478 Caterpillar 926 Starter Motor FAQs

Distributor check: What should a buyer include in a M4T95478 quotation request?

Send the complete M4T95478 reference, Caterpillar 926 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 24V 6.0kW 15T unit, packing, lead time and freight in one focused offer. Retain the 6.0kW 15T specification with the M4T95478 decision.

For repeat Caterpillar 926 supply, how should 24V be confirmed for M4T95478?

Check the machine electrical system, old-starter label and service record before ordering. Keep 6.0kW, 15T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Record the M4T95478 outcome beside the Caterpillar 926 application and received lot.

Before a sample is released, what should be checked before installing a M4T95478 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Keep the result under the complete M4T95478 item record.

Before a sample is released, when is a sample order useful for M4T95478?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep the result under the complete M4T95478 item record.

Distributor check: How should alternate references for M4T95478 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain the 6.0kW 15T specification with the M4T95478 decision.

How can a distributor plan stock for M4T95478?

Use active Caterpillar 926 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Apply the result to the M4T95478 Caterpillar 926 line rather than an unrelated starter family.

A common Caterpillar 926 purchasing question: What should receiving staff inspect on a M4T95478 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Caterpillar 926 inventory. The M4T95478 result should remain traceable to the 24V 6.0kW 15T configuration.

Distributor check: What information helps review a M4T95478 warranty enquiry?

Provide the invoice or lot reference, installation date, Caterpillar 926 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Retain the 6.0kW 15T specification with the M4T95478 decision.

Contact Elecdura for M4T95478 Starter Motor Pricing

Email info@elecdurauto.com with M4T95478, Caterpillar 926 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 24V 6.0kW 15T offer, availability, packing, lead time and freight options.