S114-801 Nissan Cefiro 12V 1.4kW Starter Motor Wholesale Supply

S114-801 Nissan Cefiro Starter Motor Wholesale Overview

S114-801 supports commercial sourcing for Nissan Cefiro with the 23300-31U02 replacement design. Buyers receive a clear 12V, 1.4kW and 11T specification that can be checked against the removed unit before quantity, packing and freight are finalized.

Import distributor teams handling tender quotation should send S114-801, the Nissan Cefiro record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, sample-to-bulk scheduling and the correct physical configuration in one useful commercial offer.

S114-801 Starter Motor Wholesale Fitment Checks

For sample confirmation, review 11T pinion, mounting face, drive reach, solenoid position and terminal orientation together with the overall drive-end reach. Measure or photograph the old unit on a flat surface where practical. Small differences at the flange or pinion can matter even when the motor and solenoid housings have similar proportions.

A correct replacement must satisfy both the 12V 1.4kW electrical requirement and the 11T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.

S114-801 Starter Motor Reference Management for B2B Purchasing

S114-801 should remain the lead reference for this Nissan Cefiro line. Cross-references are useful for discovery, but the buyer should accept them only after the 12V, 1.4kW, 11T, mounting and terminal details agree with the removed starter.

For tender quotation, keep S114-801, Nissan Cefiro, 12V, 1.4kW and 11T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the import distributor a documented basis for clear lot-to-lot comparison when the next order is raised.

S114-801 Starter Motor Distributor Packing and Stock Planning

Elecdura supports qualified wholesale orders from 20 pieces, with normal preparation of 7–15 days after order confirmation and an 18-month warranty under agreed sales terms. Neutral packaging is available, and private-label requirements can be reviewed against order quantity, artwork and delivery schedule.

Demand from a fleet powertrain store should keep S114-801 tied to Nissan Cefiro. For tender quotation, the import distributor can use a machine-down contingency stock, record the removed-unit dimensions and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping sample-to-bulk scheduling visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the S114-801 application and specification shown above for their own product comparison.

S114-801 Nissan Cefiro Starter Motor FAQs

How can an import distributor source S114-801 for tender quotation?

Import distributor teams should tie S114-801 to Nissan Cefiro, 12V, 1.4kW, 11T and the removed-unit photographs before requesting price. For tender quotation, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address sample-to-bulk scheduling and clear lot-to-lot comparison in the same quotation.

Clear lot-to-lot comparison: What should be checked before installing the S114-801 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. This supports clear lot-to-lot comparison for S114-801.

Clear lot-to-lot comparison: When is a sample order useful for S114-801?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Keep S114-801 traceable through tender quotation.

Clear lot-to-lot comparison: How can workshops photograph S114-801 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Link S114-801 photographs to the old-unit photo linkage record.

Clear lot-to-lot comparison: How should 12V be confirmed for S114-801?

Check the machine electrical system, old-starter label and service record before ordering. Keep 1.4kW, 11T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Carry the S114-801 result into sample-to-bulk scheduling.

Clear lot-to-lot comparison: Which physical details matter most when comparing S114-801?

Compare 11T pinion, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Retain S114-801 for clear lot-to-lot comparison and receiving review.

For tender quotation handled by an import distributor, what information helps review the S114-801 warranty enquiry?

Provide the invoice or lot reference, installation date, Nissan Cefiro details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Retain the S114-801 result for tender quotation.

Import distributor receiving review: How should branches keep S114-801 separate from similar starters?

Use the full reference, Nissan Cefiro application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. File S114-801 with the old-unit photo linkage check.

Send S114-801 Starter Motor RFQ Details to Elecdura

Email info@elecdurauto.com with S114-801, Nissan Cefiro details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 1.4kW 11T offer, availability, packing, lead time and freight options.