S13-136 Isuzu 4JB1 12V 2.2kW Starter Motor Bulk Supply

S13-136 Isuzu 4JB1 Starter Motor B2B Supply

S13-136 for Isuzu 4JB1 is presented for wholesale enquiries with the listed 12V, 2.2kW and 9T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Machine-repair contractor teams handling repeat-lot review should send S13-136, the Isuzu 4JB1 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address clear lot-to-lot comparison, mixed-SKU export packing and the correct physical configuration in one useful commercial offer.

S13-136 Starter Motor Data for Distributor Review

For sample confirmation, review 9T pinion and 32mm standard / 35mm custom option reference, mounting face, drive reach, solenoid position and terminal orientation together with the overall drive-end reach. Measure or photograph the old unit on a flat surface where practical. Small differences at the flange or pinion can matter even when the motor and solenoid housings have similar proportions.

For technical sign-off, compare the stated 12V, 2.2kW and 9T data with the removed unit or service record. Then inspect solenoid clocking and terminal direction. These checks keep an electrical match from being undermined by a cable-access problem.

S13-136 Isuzu 4JB1 Starter Motor Reference Control for Distributors

S13-136 should remain the lead reference for this Isuzu 4JB1 line. Cross-references are useful for discovery, but the buyer should accept them only after the 12V, 2.2kW, 9T, mounting and terminal details agree with the removed starter.

For repeat-lot review, keep S13-136, Isuzu 4JB1, 12V, 2.2kW and 9T on one purchasing record. At goods-in, review old-unit photo linkage before releasing the lot. This gives the machine-repair contractor a documented basis for clear lot-to-lot comparison when the next order is raised.

S13-136 Starter Motor Export Supply and Inventory Planning

For qualified B2B orders, the normal MOQ is 20 pieces and preparation is usually 7–15 days after the order is confirmed. Elecdura can discuss neutral cartons, private-label review, export documents and an 18-month warranty according to the agreed quotation.

Demand from a fleet powertrain store should keep S13-136 tied to Isuzu 4JB1. For repeat-lot review, the machine-repair contractor can use a machine-down contingency stock, archive the carton and lot label and review old-unit photo linkage at goods-in. This supports clear lot-to-lot comparison while keeping mixed-SKU export packing visible.

The video below introduces Elecdura starter-motor production and electrical testing for B2B supply. Buyers can review factory capability while using the S13-136 application and specification shown above for their own product comparison.

S13-136 Isuzu 4JB1 Starter Motor FAQs

How can a machine-repair contractor source S13-136 for repeat-lot review?

Machine-repair contractor teams should tie S13-136 to Isuzu 4JB1, 12V, 2.2kW, 9T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review old-unit photo linkage. Ask Elecdura to address mixed-SKU export packing and clear lot-to-lot comparison in the same quotation.

During repeat-lot review, what should receiving staff inspect on the S13-136 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Isuzu 4JB1 inventory. Retain the S13-136 result for repeat-lot review.

For repeat-lot review handled by a machine-repair contractor, which physical details matter most when comparing S13-136?

Compare 9T pinion and 32mm standard / 35mm custom option reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. File S13-136 with the old-unit photo linkage check.

During repeat-lot review, when is a sample order useful for S13-136?

A sample is useful when the old label is incomplete, the application record is uncertain or several similar housings are in local stock. Confirm the sample against mounting, drive and electrical details before scaling the order. Keep the accepted photographs and measurements for later purchasing and receiving checks. Use S13-136 when arranging mixed-SKU export packing.

Machine-repair contractor receiving review: How should alternate references for S13-136 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. Retain the S13-136 result for repeat-lot review.

Old-unit photo linkage check: Can S13-136 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. File S13-136 with the old-unit photo linkage check.

To support clear lot-to-lot comparison, how can a distributor plan stock for S13-136?

Use active Isuzu 4JB1 customers or machines, recent usage, replenishment time and the cost of an emergency shortage. Separate trial pieces from normal branch stock and project demand. A defined reorder point is more reliable than buying a mixed group only when one urgent workshop request appears. Retain the S13-136 result for repeat-lot review.

For mixed-SKU export packing, how should 12V be confirmed for S13-136?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.2kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain the S13-136 result for repeat-lot review.

Request S13-136 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with S13-136, Isuzu 4JB1 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 9T offer, availability, packing, lead time and freight options.