S13-204 Yanmar Engine 4TNE94/4TNV98 12V 2.2kW Starter Motor B2B Supply

S13-204 Yanmar Engine 4TNE94/4TNV98 Starter Motor Wholesale Overview

S13-204 for Yanmar Engine 4TNE94/4TNV98 is presented for wholesale enquiries with the listed 12V, 2.2kW and 9T specification. That precise identity gives commercial buyers a practical starting point for checking fit, availability, packing and delivery without relying on a broad starter-family description.

Equipment dealer teams handling repeat-lot review should send S13-204, the Yanmar Engine 4TNE94/4TNV98 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address fewer fitment returns, destination-specific packing and the correct physical configuration in one useful commercial offer.

S13-204 Starter Motor Wholesale Mounting and Electrical Checks

Compare 9T pinion and 35mm reference, mounting face, drive reach, solenoid position and terminal orientation first, then inspect the housing clearance around the drive end. The purpose is to confirm how the unit mounts and engages, not merely whether it resembles another starter in the warehouse.

A correct replacement must satisfy both the 12V 2.2kW electrical requirement and the 9T drive specification. Inspect the control-terminal connection and battery-cable route as part of the fit check rather than treating them as an after-installation detail.

S13-204 Starter Motor Cross-References for Wholesale Supply

Keep the reference group S13-204 attached to the Yanmar Engine 4TNE94/4TNV98 details and confirmed photographs. This gives branch staff a practical reorder record and prevents a number from being separated from the exact configuration previously received.

For repeat-lot review, keep S13-204, Yanmar Engine 4TNE94/4TNV98, 12V, 2.2kW and 9T on one purchasing record. At goods-in, review terminal clocking and cable clearance before releasing the lot. This gives the equipment dealer a documented basis for fewer fitment returns when the next order is raised.

S13-204 Starter Motor B2B Supply for Yanmar Engine 4TNE94/4TNV98

Buyers can request neutral packing or discuss private-label presentation for suitable volumes. The usual minimum is 20 pieces and lead time is normally 7–15 days after confirmation, while freight options are selected from the destination, carton quantity and required arrival date.

Demand from an industrial-engine distributor should keep S13-204 tied to Yanmar Engine 4TNE94/4TNV98. For repeat-lot review, the equipment dealer can use a repeat-lot release rule, link the machine plate to the item and review terminal clocking and cable clearance at goods-in. This supports fewer fitment returns while keeping destination-specific packing visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep S13-204, Yanmar Engine 4TNE94/4TNV98 and the confirmed physical configuration on the quotation.

S13-204 Yanmar Engine 4TNE94/4TNV98 Starter Motor FAQs

How can an equipment dealer source S13-204 for repeat-lot review?

Equipment dealer teams should tie S13-204 to Yanmar Engine 4TNE94/4TNV98, 12V, 2.2kW, 9T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review terminal clocking and cable clearance. Ask Elecdura to address destination-specific packing and fewer fitment returns in the same quotation.

For repeat-lot review handled by an equipment dealer, how should 12V be confirmed for S13-204?

Check the machine electrical system, old-starter label and service record before ordering. Keep 2.2kW, 9T and the terminal arrangement in the same comparison. A starter can have a similar flange but the wrong voltage, output or cable layout, so these facts should be confirmed together. Retain S13-204 for fewer fitment returns and receiving review.

Equipment dealer receiving review: What should receiving staff inspect on the S13-204 shipment?

Confirm carton count, labels and visible condition before sampling. On selected units, compare the pinion, mounting face, solenoid and terminals with the confirmed record. Isolate any damaged or different unit with carton and lot photographs before the remainder is released to normal Yanmar Engine 4TNE94/4TNV98 inventory. Retain the S13-204 result for repeat-lot review.

For repeat-lot review handled by an equipment dealer, what should a buyer include in the S13-204 quotation request?

Send the complete S13-204 reference, Yanmar Engine 4TNE94/4TNV98 details, quantity, destination and required date. Add clear front, side and terminal photographs of the removed starter. This gives Elecdura enough information to discuss the intended 12V 2.2kW 9T unit, packing, lead time and freight in one focused offer. File S13-204 with the terminal clocking and cable clearance check.

During repeat-lot review, how can workshops photograph S13-204 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Use S13-204 when arranging destination-specific packing.

For destination-specific packing, how should alternate references for S13-204 be handled?

List every complete alternate on a separate RFQ line and state whether it came from a label, invoice or parts record. Compare voltage, output, pinion, mounting and terminals before treating it as interchangeable. If one point remains uncertain, request a separate offer instead of combining the numbers. This supports fewer fitment returns for S13-204.

Destination-specific packing question: Can S13-204 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Keep S13-204 traceable through repeat-lot review.

To support fewer fitment returns, what can cause slow cranking besides a fault in S13-204?

Low battery capacity, excessive voltage drop, corroded lugs, weak grounds, undersized cables and mechanical engine drag can all reduce cranking speed. Record loaded battery voltage and cable-drop readings before replacement. This protects the buyer from changing a starter while the original circuit problem remains. Link S13-204 photographs to the terminal clocking and cable clearance record.

Ask for S13-204 B2B Starter Motor Supply Terms

Email info@elecdurauto.com with S13-204, Yanmar Engine 4TNE94/4TNV98 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.2kW 9T offer, availability, packing, lead time and freight options.