S13-294 Yanmar 4TN78 12V 2.5kW Starter Motor Wholesale Supply

S13-294 Yanmar 4TN78 Starter Motor B2B Purchasing Overview

Yanmar 4TN78 parts buyers can quote S13-294 in the Hitachi-type replacement configuration with 12V, 2.5kW and 15T. The combination matters because it keeps Yanmar 4TN78 orders focused on the listed electrical output and drive instead of relying on a similar motor-body appearance; it also gives sales and warehouse teams one consistent description for samples, bulk orders and reorders.

Branch inventory manager teams handling repeat-lot review should send S13-294, the Yanmar 4TN78 record, required quantity, destination and delivery timing together. Add straight drive-end and terminal-side photographs of the removed starter. Elecdura can then address predictable export packing, consolidated freight planning and the correct physical configuration in one useful commercial offer.

S13-294 Starter Motor Wholesale Fitment Checks

Receiving and technical teams should concentrate on 15T pinion and 44mm reference, mounting face, drive reach, solenoid position and terminal orientation. A square drive-end image plus a side image gives a much clearer comparison of mounting, locating and pinion relationships than a general product shot, reducing the chance of releasing a visually similar but unsuitable unit.

Use the machine plate or removed-starter label to confirm 12V; retain the listed 2.5kW and 15T data in the same record. Check cable-stud size and orientation before accepting a sample, since terminal interference may only become visible at installation.

S13-294 Starter Motor OE Reference Control for B2B Orders

On cartons, purchase orders and customer quotations, retain the complete S13-294 string. If additional references are supplied, show each one in full rather than compressing them into a broad interchange statement; the application and physical unit still require a complete match.

For repeat-lot review, keep S13-294, Yanmar 4TN78, 12V, 2.5kW and 15T on one purchasing record. At goods-in, review received-lot sample retention before releasing the lot. This gives the branch inventory manager a documented basis for predictable export packing when the next order is raised.

S13-294 Starter Motor B2B Supply for Yanmar 4TN78

MOQ, packing and freight should reflect how the buyer will distribute the product. The normal minimum is 20 pieces and preparation is 7–15 days after confirmation; warranty coverage is 18 months under agreed terms, with labeling and documentation settled before shipment.

Demand from a dealer parts counter should keep S13-294 tied to Yanmar 4TN78. For repeat-lot review, the branch inventory manager can use a scheduled maintenance buffer, separate neighboring cross-references and review received-lot sample retention at goods-in. This supports predictable export packing while keeping consolidated freight planning visible.

Watch the Elecdura factory video for an overview of starter-motor manufacturing and electrical testing. For purchasing, keep S13-294, Yanmar 4TN78 and the confirmed physical configuration on the quotation.

S13-294 Yanmar 4TN78 Starter Motor FAQs

How can a branch inventory manager source S13-294 for repeat-lot review?

Branch inventory manager teams should tie S13-294 to Yanmar 4TN78, 12V, 2.5kW, 15T and the removed-unit photographs before requesting price. For repeat-lot review, state quantity, destination and delivery timing, then review received-lot sample retention. Ask Elecdura to address consolidated freight planning and predictable export packing in the same quotation.

For consolidated freight planning, can S13-294 be supplied with private-label packaging?

Neutral packaging is available, and private-label requirements can be reviewed for qualified orders. Send the expected quantity, artwork, label fields, carton preference and destination early. Elecdura will confirm what can be supported, any additional preparation and the effect on lead time before the order is finalized. Keep S13-294 traceable through repeat-lot review.

Branch inventory manager receiving review: How should branches keep S13-294 separate from similar starters?

Use the full reference, Yanmar 4TN78 application and core specification on the internal item label. Store the confirmed product photographs with the ERP record and avoid abbreviating the number. Receiving staff can then compare each new lot with the same documented configuration before distributing it to branches. Link S13-294 photographs to the received-lot sample retention record.

Consolidated freight planning question: Which physical details matter most when comparing S13-294?

Compare 15T pinion and 44mm reference, mounting face, drive reach, solenoid position and terminal orientation with the removed starter, using a straight flange view and a side view parallel to the shaft. Also inspect the locating surface and drive projection. Matching only paint, motor diameter or one mounting ear can hide a difference that affects installation or pinion engagement. Carry the S13-294 result into consolidated freight planning.

Branch inventory manager receiving review: How can workshops photograph S13-294 for fitment review?

Clean the old unit enough to expose the label, mounting face and terminals, then photograph it square to the flange, from the side and from the terminal end. Include a ruler for key dimensions where practical. Avoid wide-angle close-ups that distort ear spacing or pinion position. Retain S13-294 for predictable export packing and receiving review.

For repeat-lot review handled by a branch inventory manager, what should be checked before installing the S13-294 starter?

Load-test the battery, measure voltage drop on positive and ground circuits, inspect cable lugs and confirm the engine turns freely. Check the ring gear and mounting-ground contact as well. These steps help separate a starter concern from weak batteries, high resistance or mechanical drag that can produce similar symptoms. Retain the S13-294 result for repeat-lot review.

For consolidated freight planning, is a matching 15T pinion enough to approve S13-294?

No. Tooth count is only one control. The locating face, mounting pattern, pinion reach, 44mm reference, solenoid position, terminals and 12V system must also agree with the removed starter. Review the full set before a sample or bulk order is accepted. File S13-294 with the received-lot sample retention check.

For consolidated freight planning, what information helps review the S13-294 warranty enquiry?

Provide the invoice or lot reference, installation date, Yanmar 4TN78 details, service time and a clear description of the symptom. Include photographs of the flange, drive and terminals plus battery and voltage-drop results. Keep the unit assembled until Elecdura confirms the next step under the agreed terms. Use S13-294 when arranging consolidated freight planning.

Request S13-294 Starter Motor Wholesale Pricing

Email info@elecdurauto.com with S13-294, Yanmar 4TN78 details, old-unit photographs, quantity, delivery country and required date. Elecdura will reply with the matching 12V 2.5kW 15T offer, availability, packing, lead time and freight options.