1810A008 Mitsubishi Starter Motor 12V 1.2kW 10T

1810A008 Mitsubishi Starter Motor B2B Supply for Aftermarket Buyers

1810A008 gives aftermarket buyers a defined 12V, 1.2kW, 10-tooth clockwise configuration for Mitsubishi vehicles and equipment cross-referenced to 1810A008. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

Build the approval trail for 1810A008 around three items: the complete 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675 reference group, the Mitsubishi vehicles and equipment cross-referenced to 1810A008 application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

1810A008 Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 1810A008.

1810A008 Starter Motor Distributor Specifications for Aftermarket Buyers

1810A008 Starter Motor OE Cross-Reference Review for Fleet Replacement

Use 1810A008 as the primary purchasing reference and cross-check 1810A185, 1810A374, M000T31671, M000T31675. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

1810A008 Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675 group together with the 12V, 1.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

1810A008 Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the 1810A008 lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

1810A008 Starter Motor MOQ and Private-Label Supply for Bulk Procurement

1810A008 Starter Motor Distributor FAQ for B2B Supply

How can distributors reduce disputes on 1810A008 claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for 1810A008?

Use 1810A008 as the control reference and compare the complete group 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one RFQ and order line so repeat orders remain traceable.

Where is 1810A008 commonly used, and what still needs confirmation?

Confirm the complete 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675 group together with the 12V, 1.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on 1810A008?

Confirm the complete 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675 group together with the 12V, 1.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched 1810A008 order?

Confirm the complete 1810A008 / 1810A185 / 1810A374 / M000T31671 / M000T31675 group together with the 12V, 1.2kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering 1810A008?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for 1810A008?

Tie every carton and sampled unit to 1810A008, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 12V starter replace 1810A008?

A substitute is acceptable only when its complete OE relationship, 12V system, 1.2kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample prior to changing the purchase line. Retain materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a 1810A008 fault from an equipment fault?

Inspect battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

Request a B2B Quote for 1810A008 Starter Motors

Send the complete reference, Mitsubishi vehicles and equipment cross-referenced to 1810A008, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.