18794 Suzuki Starter Motor 12V 2.2kW 13T

18794 Suzuki Starter Motor Replacement Supply for B2B Procurement

18794 is intended for procurement against Suzuki equipment identified by starter reference 18794 with a 12V, 2.2kW, 13-tooth counterclockwise configuration. Keep the approved unit photos, application record and full reference group together so future quotations and repeat orders stay linked to the same physical starter.

Treat 18794 as one controlled purchasing identity. Keep 18794 / M8T70471 / 31A66-00101 / Js1014 / STR71041 / M008T7041 / OD31355, Suzuki equipment identified by starter reference 18794, the approved dimensional record and the signed sample together in the sourcing file. If a future offer changes any suffix, rating or drive-end detail, reopen technical approval before comparing price or delivery. This keeps distributor quotations tied to the part actually reviewed rather than to a visually similar starter family.

18794 Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for 18794.

18794 Starter Motor Distributor Specifications for B2B Supply

18794 Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use 18794 as the primary purchasing reference and cross-check M8T70471, 31A66-00101, Js1014, STR71041, M008T7041, OD31355. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

18794 Starter Motor Bulk Fitment Approval for Fleet Replacement

Before accepting 18794 as a replacement, obtain the full vehicle, machine or engine record and compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

18794 Starter Motor Wholesale Receiving Inspection for Wholesale Supply

Receiving control should link the carton, unit label and inspection sample to 18794. Verify reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

18794 Starter Motor MOQ and Private-Label Supply for Distributor Sourcing

18794 Starter Motor Distributor FAQ for Bulk Procurement

What receiving checks protect a 18794 bulk order?

Tie every carton and sampled unit to 18794, the approved reference document and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional document. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as 18794?

A substitute is acceptable only when its complete reference relationship, 12V system, 2.2kW rating, 13T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the order line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a 18794 starter motor?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for 18794?

Send 18794 and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for 18794 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment information is incomplete. Mark the approved sample with 18794, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for 18794 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair 18794 warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which reference numbers should buyers confirm for 18794?

Use 18794 as the control reference and cross-check M8T70471, 31A66-00101, Js1014, STR71041, M008T7041, OD31355. Retain the complete old-unit label plus drive-end, mounting-face and rear-terminal photos with the quotation and purchase line so repeat orders remain tied to the approved unit.

Which applications should buyers confirm for the 18794 starter motor?

The specified application is Suzuki equipment identified by starter reference 18794. Because a model or engine family can include production changes, confirm the machine, vehicle or engine record and the complete old-unit suffix before promising fitment. Keep the approved record tied to one physical starter configuration.

Request a B2B Quote for 18794 Starter Motors

Send the complete reference, Suzuki equipment identified by starter reference 18794, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.