23300-HA00A M0T80081 Mazda Nissan Starter Motor 12V 1.0kW 8T

23300-HA00A Starter Motor Wholesale Fitment Overview for Distributor Sourcing

M8T62671 identifies an unrelated 24V heavy-duty MAN starter and is excluded from this interchange. The controlled 23300-HA00A / M0T80081 group is the compact 12V Mazda/Nissan unit described on this page.

Mazda and Nissan names appear together because the same starter family is used across shared or related vehicle platforms. Approval must still follow the exact vehicle, engine and old-unit label, since a broad Mazda 323, Demio or Vanette description can include another starter by year or engine.

23300-HA00A Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the verified 23300-HA00A / M0T80081 specification and fitment controls on this page for product approval.

23300-HA00A Starter Motor Distributor Specifications for Wholesale Supply

23300-HA00A Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use 23300-HA00A, M0T80081 / M000T80081, BPD4-18-400, B6DK-18-400 and WAI 17592N as the controlled search group. Exclude M8T62671; it is a different heavy-duty starter and would mislead the buyer.

23300-HA00A Starter Motor Bulk Fitment Approval for Fleet Procurement

For Mazda 323 or Demio and Nissan Vanette inquiries, capture the chassis, engine code and production year. Compare the three mounting holes, roughly 74 mm flange, plug type, pinion position and rear-terminal clearance. Shared vehicle platforms do not remove the need for a complete part-number check.

23300-HA00A Starter Motor Receiving Inspection for Distributor Stock

Receiving staff should verify 12V, 1.0kW and 8T, then compare the three-hole nose casting, flange, plug and terminal pattern with the signed compact-starter sample. A carton labelled M8T62671, a 24V marking or a large heavy-duty housing is an immediate hold condition, not an acceptable alternate reference.

23300-HA00A Starter Motor MOQ and Private-Label Supply for B2B Orders

This smaller passenger and light-commercial starter needs packaging that protects the plug, terminals and three mounting ears without allowing movement. Private-label cartons can be reviewed for qualified orders, but the 23300-HA00A / M0T80081 identity and lot traceability must remain clear.

23300-HA00A Starter Motor Distributor FAQ for Bulk Procurement

Why is M8T62671 excluded from the 23300-HA00A interchange?

M8T62671 identifies a heavy-duty 24V, 5.0kW, 12-tooth starter for MAN applications. It is not the compact 12V M0T80081 used with 23300-HA00A. The two similar-looking Mitsubishi reference strings describe physically and electrically different units. Keeping M8T62671 outside this interchange prevents an incorrect quotation, sample approval or bulk shipment.

Which M0T80081 spelling should a buyer use?

Catalogs may print M0T80081, M000T80081 or a suffix such as M0T80081A. Record the exact label from the removed starter and include 23300-HA00A plus the Mazda BPD4 or B6DK reference when present. The spelling variation helps search, but the buyer must still match the 12V, 1.0kW, 8-tooth configuration, mounting face, plug and terminals.

What vehicle information is needed for Mazda 323 or Demio fitment?

Provide the model, production year, chassis and engine code, because Mazda 323 and Demio ranges include multiple engines and starter designs. Attach the old-unit label and clear photos of the three-hole mounting face, plug and rear terminals. If the application is a Nissan Vanette or a related Ford/Mazda platform, state that relationship explicitly so the supplier checks the correct cross-reference group.

Why should the power rating be controlled at 1.0kW?

The approved M0T80081 / 23300-HA00A ordering group is specified as 12V and 1.0kW. A 1.2kW offer should remain a separate proposal rather than being accepted by appearance alone. Buyers should compare the removed rating plate, complete reference, mounting geometry, drive and terminals, then conduct sample approval before volume supply or any change to the purchasing specification.

Which mounting features distinguish this compact starter?

Confirm three mounting holes, the flange near 74 mm, threaded-hole arrangement, plug type, pinion rest position and terminal clearance. A compact 8-tooth starter can still differ in ear spacing or clocking. Photograph the mounting face square-on and measure the locating feature. Do not pull a mismatched unit into place with bolts, because that can distort the housing or damage the ring gear.

How should 23300-HA00A units be inspected on receipt?

Check samples from multiple cartons for the full reference group, 12V and 1.0kW markings, 8-tooth drive, compact housing, three-hole nose, plug and terminals. Compare with the signed Mazda/Nissan sample and record the supplier lot. Immediately quarantine any 24V label, 12-tooth drive, heavy-duty M8T62671 marking or unexplained casting change before inventory is released.

What tests help diagnose a no-crank complaint on this Mazda/Nissan unit?

Check battery condition, ignition or start signal, voltage drop, grounds and engine mechanical load before removing the starter. Inspect the ring gear and connector for heat or corrosion. Record cranking voltage and cable drop, then retain the old and supplied labels with installation photos. That evidence helps distinguish an M0T80081 product issue from a battery, wiring, switch or mechanical problem.

Can the same private-label carton cover Mazda and Nissan sales?

A common carton may be practical only when the technical label clearly lists the approved 23300-HA00A / M0T80081 identity and the distributor controls fitment separately. Artwork must not imply universal compatibility across every Mazda 323, Demio or Nissan Vanette. Keep vehicle-specific application guidance in the catalog or ERP, and preserve the lot code for receiving and warranty traceability.

What should a wholesale RFQ for M0T80081 include?

Send the exact M0T80081 spelling and suffix, 23300-HA00A or BPD4/B6DK references, vehicle, engine, year, old-unit photographs, quantity and destination. State whether samples, neutral packing, private-label cartons or inspection reports are required. Complete information allows the supplier to quote the compact 1.0kW 8T starter instead of confusing it with the unrelated heavy-duty M8T family.

Request a B2B Quote for 23300-HA00A Starter Motors

Send the Mazda or Nissan vehicle, engine and year, full old-unit label, three mounting-face photos, plug view, quantity and destination. Elecdura will quote the verified compact 12V 1.0kW 8T configuration.