2889951 Cummins ISBe Starter Motor Wholesale Supply

2889951 Starter Motor Distributor Application Guide for Cummins ISBe engine

For a fleet parts team, 2889951 identifies one Cummins ISBe engine requirement. The supplier-defined 24V 4.5kW 10T module-3.175 unit within the 2889951 reference group provides a clear fitment boundary for sample, stock and replacement reviews.

A useful enquiry pairs 2889951 with the equipment record, old-starter label and clear front, side and terminal images. Add the order quantity, destination and required date so technical selection, sample planning, carton marking and freight options can be addressed in one response.

2889951 Starter Motor Mounting Dimensions for Distributor Approval

Use the 2889951 technical drawing to check Ø89 locating diameter, 46 mm distance to drive gear and Ø127 mounting-hole circle. Add the 3 × Ø11 mounting holes to the receiving sheet. These are practical controls for an approved sample because they can be measured before the starter is installed or released to branch stock.

Complete the 2889951 comparison with 24V, 4.5kW, the 10T drive, module 3.175 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

2889951 Starter Motor Reference Group for Wholesale Sourcing

• Use the full number: Start with 2889951, 2890419, 4093888, STL2446ML, STL2446NB, 26024055A, retaining prefixes, suffixes and separators in the RFQ.
• Confirm the hardware: The final match requires the stated electrical rating, drive, mounting interface and terminal side; unmatched versions should remain separate.

2889951 Starter Motor Distributor Stock and Delivery Support

MOQ begins at 20 pieces, with normal lead time of 7–15 days after order confirmation and an 18-month warranty under agreed terms. For 2889951, the offer can distinguish samples, available stock and production quantities while confirming carton protection and the shipment plan for the destination.

Use 2889951 and the ISBe engine record together, then compare pinion and terminals with the removed unit. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

Elecdura’s video shows starter-motor production and electrical testing used to support wholesale orders. It provides supplier-capability context for 2889951; the product decision itself still depends on the complete reference, 24V 4.5kW rating, drive end, mounting face and terminal layout.

2889951 Starter Motor Questions from Commercial Buyers

What traceability details should accompany a warranty enquiry for 2889951 in a Cummins ISBe branch review?

Keep the carton or product traceability code and note when and where 2889951 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete evidence allows technical support to respond without repeated requests for basic information.

Which old-unit checks matter most when sourcing 2889951 during branch sourcing?

Confirm 2889951 against the complete OE number, the stated Cummins ISBe engine use and clear front, side and terminal photographs. The decisive points are 10T, 3 × Ø11 mounting holes and 46 mm distance to drive gear. Those controls keep visually related starters from being combined in one order.

How should buyers use the 2889951 cross-reference group in a Cummins ISBe branch sourcing program?

A number match narrows the search but does not finish it. For 2889951, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What workshop readings are useful when diagnosing a starting complaint involving 2889951 in a Cummins ISBe branch workshop?

Load-test the battery set and measure voltage drop on the positive and ground circuits while cranking. Inspect cable lugs, chassis grounds, the start-control signal and ring-gear condition before replacing 2889951. These checks distinguish a starter fault from low battery capacity, resistance or a control-circuit problem.

Why is a straight mounting-face photo useful for confirming 2889951 during a Cummins ISBe branch inspection?

Place the removed starter and 2889951 on the same mounting-face orientation. Compare Ø89 locating diameter, Ø127 mounting-hole circle, the 3 × Ø11 mounting holes and the 46 mm distance to drive gear. The drawing is a dimensional reference rather than a scale template, so use suitable measuring tools and verify the terminals separately.

Can urgent service demand and routine 2889951 replenishment share one enquiry in a Cummins ISBe branch program?

Separate planned maintenance demand from breakdown coverage and new-account stock. Share the number of supported machines, recent 2889951 usage, transfer time between branches and the desired reserve. The resulting order can combine immediate units and scheduled replenishment while keeping the application and physical specification clearly identified.

How can a buyer quarantine a mismatched 2889951 unit quickly during a Cummins ISBe branch receiving check?

For 2889951, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø11 mounting holes, Ø89 locating diameter and the specified 10T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What should be included in a wholesale enquiry for 2889951 in a Cummins ISBe branch sourcing program?

Send the complete OE number, exact Cummins ISBe engine details, removed-unit photographs, quantity and destination. Add the required arrival date, carton marking, payment preference and any sample request. Elecdura can then quote the specified 24V 4.5kW 10T CW starter with packing, lead time, warranty and freight options.

2889951 Send a Starter Motor Distributor Enquiry

For a focused 2889951 quotation, share the machine or engine record, old-starter number, mounting and terminal images, order volume, delivery country and timing. You can email the RFQ directly to info@elecdurauto.com; Elecdura will reply with the matching specification, availability, packing and commercial terms.