CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Starter Motor

CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Industrial Diesel Engine Starter Motor for CUMMINS 4BT3.3 (A2300)

For importers updating a customer item master, this aftermarket industrial diesel engine starter motor is specified for CUMMINS 4BT3.3 (A2300) with 12V, 2.0kW and 15T. The page keeps the replacement identity, technical definition and wholesale order information in one place.

For inventory buyers preparing a volume quote, the goal is a repeatable supply line: one agreed product identity, one packaging definition and one set of incoming checks. This is useful for importers building category coverage as well as fleet suppliers replenishing an existing starter reference.

CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Starter Motor Specifications and Technical Drawing

For engine-parts specialists separating similar housings, the 15T pinion and module 2.54 are important replacement identifiers. Match them with the flange and drive projection to protect the ring gear from an incorrect tooth pitch or engagement depth.

For fleet-parts buyers evaluating a direct replacement, the source-faithful technical drawing records the available mounting information for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T; use the printed values together with the product views because the drawing supports comparison and should not be scaled from the screen.

CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Aftermarket Replacement and Application

For maintenance suppliers confirming electrical ratings, use CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T as the primary product identity for CUMMINS 4BT3.3 (A2300). The cross-reference group CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T supports aftermarket matching, while the electrical rating and drive-end configuration distinguish the exact version supplied here.

For equipment-parts dealers checking repeat-order specifications, product photos and the stated specifications should be reviewed together. If the old starter uses another pinion, mounting face or rear connection, keep that configuration on a separate RFQ until it is identified.

CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Wholesale Supply for Distributors and Importers

For purchasing teams planning replenishment, Elecdura supplies CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T for wholesale and distributor orders with a standard MOQ of 20 pcs, an indicative 7–15 day lead time after order confirmation and an 18-month warranty under agreed terms. Neutral packaging and private-label review are available for qualified programs.

For distributors preparing distributor pricing, the order specification may include armature, solenoid, no-load or load testing together with label and packaging requirements. This gives receiving teams practical points for sampling a batch without treating appearance alone as proof of fitment.

CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Starter Motor Buyer FAQ

Which specification deserves priority for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T when checking a replacement proposal?

For replacement-parts sellers checking repeat-order specifications, CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T should be treated as one inquiry group only after the unit in hand is compared. Ask the customer for the complete label and clear views of the drive end, flange and terminals. If a suffix, housing shape or terminal clocking differs, keep it as a separate RFQ entry instead of assuming that the shared number guarantees interchangeability.

Which specification deserves priority for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T technical claim evidence before a purchase order is released?

For warehouse planners planning replenishment, retain the unit label, affected quantity, carton condition, installation photos and cranking-voltage results. Add close images of the drive and terminals and note the CUMMINS 4BT3.3 (A2300) equipment. This evidence helps separate transport damage, an electrical-system problem, incorrect fitment and a starter fault without relying on a general description of failure.

How should a workshop distinguish CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T side-profile photograph for a documented fitment decision?

For importers reviewing drive-end geometry, the side profile of CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T shows body length, solenoid placement and the relationship between flange and drive. Compare it with a square side view of the removed starter, then use measured axial references where available. This angle helps reveal a housing or projection difference that a front-only photograph can miss.

Which detail separates 12V system compatibility when confirming the RFQ entry?

For product managers preparing an OE-based quote, CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T is a 12V starter and must be connected only to the matching machine electrical system. Read the voltage marking on the old unit and verify the battery arrangement before stock is committed. A housing can look correct while the winding and solenoid are designed for another voltage, so appearance must not override the electrical label.

Which check should lead CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T locating face when preparing a technical inquiry?

For maintenance suppliers separating similar housings, the CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T flange should sit flat against the CUMMINS 4BT3.3 (A2300) mounting surface without being pulled into place by the bolts. Clean both faces and compare the locating shoulder, hole pattern and any stated diameters. Rocking, a visible gap or bolt misalignment indicates that the version check is incomplete and installation should stop.

What should purchasing verify first for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T solenoid and cable routing for warehouse identification?

For equipment-parts dealers evaluating a direct replacement, use the side and rear photographs of CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T to check solenoid position, battery-stud direction and start-terminal access in CUMMINS 4BT3.3 (A2300). Cables should reach without stretching, sharp bends or contact with hot and moving parts. If the customer's old unit is clocked differently, request an installed photo before the order is assigned.

Which check should lead locating diameter for a documented fitment decision?

For purchasing teams comparing the flange and terminals, no locating diameter is published for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T. Measure the old starter at the flange shoulder with a caliper and photograph the measuring points. Combine that value with the hole pattern and pinion projection before quoting, because a visually close flange can still center the drive differently and should not inherit dimensions from another model.

What evidence best identifies CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T cartons and units when several versions look alike?

For distributors planning mixed-model inventory, sample cartons from different positions in the shipment and compare the CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T labels, 12V marking, 15-tooth pinion, flange shape and terminal protection with the ordered item description. Photograph any mixed marking, damaged terminal or different drive end before workshop fitting, and isolate those pieces so the rest of the lot can be assessed consistently.

Request a Wholesale Quote for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T Industrial Diesel Engine Starter Motor

For aftermarket product managers building a new starter range, request pricing for CUMMINS 4BT3.3 (A2300) 12V 2.0kW 15T by sharing the application, quantity, delivery country and any neutral or private-label packaging needs. Clear label, drive-end, flange and terminal photos help confirm the exact starter before the offer is issued.