DRS0895 Mitsubishi Starter Motor 24V 5.0kW 11T

DRS0895 Mitsubishi Starter Motor B2B Supply for Aftermarket Buyers

DRS0895 gives aftermarket buyers a defined 24V, 5.0kW, 11-tooth clockwise configuration for Mitsubishi vehicles and equipment cross-referenced to DRS0895. Link the complete reference group to the buyer's machine or engine record, then approve the mounting geometry, pinion position and terminal layout before releasing distributor stock.

A reliable B2B listing for DRS0895 is more than a cross-reference lookup. The sourcing file should show how DRS0895 / 114893 / M008T87171 / CST35604 / STM3778 / 18539N, Mitsubishi vehicles and equipment cross-referenced to DRS0895, the old unit and the supplied sample were reconciled. Keep photographs and inspection results with the buyer's internal item code, then require a fresh approval if any electrical or mechanical characteristic changes on a later production lot.

DRS0895 Starter Motor B2B Production and Test Video for Distributor Sourcing

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating DRS0895.

DRS0895 Starter Motor Distributor Specifications for Bulk Procurement

DRS0895 Starter Motor OE Cross-Reference Review for B2B Supply

Use DRS0895 as the primary purchasing reference and cross-check 114893, M008T87171, CST35604, STM3778, 18539N. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

DRS0895 Starter Motor Bulk Fitment Approval for Aftermarket Buyers

Fitment control for DRS0895 starts with the old starter and the application record. Compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

DRS0895 Starter Motor Wholesale Receiving Inspection for Fleet Replacement

Inspect incoming DRS0895 lots against the signed sample and purchase-line specification. Check reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming an unverified substitute that can stop equipment, generate a claim and turn a low unit price into a costly order.

DRS0895 Starter Motor MOQ and Private-Label Supply for Wholesale Supply

DRS0895 Starter Motor Distributor FAQ for Distributor Sourcing

What must be approved before volume supply for DRS0895?

Confirm the complete DRS0895 / 114893 / M008T87171 / CST35604 / STM3778 / 18539N group together with the 24V, 5.0kW, 11-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on DRS0895?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of DRS0895 starters be inspected?

Tie every carton and sampled unit to DRS0895, the approved cross-reference set and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for DRS0895?

A substitute is acceptable only when its complete OE relationship, 24V system, 5.0kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample prior to changing the purchase line. Retain materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a DRS0895 warranty claim?

Inspect battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a DRS0895 wholesale quotation?

Send DRS0895 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Can DRS0895 be sampled before a distributor order?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the approved sample with DRS0895, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

How should DRS0895 packaging support aftermarket traceability?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling prior to production so the packaging supports both sales presentation and receiving control.

How should warranty evidence be prepared for DRS0895?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable supporting evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete supporting evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Request a B2B Quote for DRS0895 Starter Motors

Send the complete reference, Mitsubishi vehicles and equipment cross-referenced to DRS0895, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.