FYD164-M Heavy-Duty Starter Motor 24V 6.0kW 12T

FYD164-M Heavy-Duty Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of FYD164-M starts with the 24V, 6.0kW, 12-tooth clockwise configuration and the stated use in catalog-specified heavy-duty equipment applications. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

Build the approval trail for FYD164-M around three items: the complete FYD164-M reference group, the catalog-specified heavy-duty equipment applications application record and the accepted physical sample. Those controls should follow the product from quotation through receiving and warranty review. They also help a distributor separate genuine repeat demand from an inquiry for a nearby starter that shares only part of the number.

FYD164-M Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD164-M.

FYD164-M Starter Motor Distributor Specifications for Aftermarket Buyers

FYD164-M Starter Motor Catalog Reference Review for Fleet Replacement

Use FYD164-M as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD164-M Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete FYD164-M group together with the 24V, 6.0kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

FYD164-M Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the FYD164-M lot rather than inspecting only the top carton. Compare reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

FYD164-M Starter Motor MOQ and Private-Label Supply for Bulk Procurement

FYD164-M Starter Motor Distributor FAQ for B2B Supply

How should FYD164-M be controlled in a B2B starter order?

Use FYD164-M as a product-reference control reference, not as an OE interchange claim. The catalog specification narrows the candidate, but it does not prove vehicle or engine fitment. Keep the removed-unit label, drive-end photograph, mounting-face view, rear-terminal view and measured pinion data in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Where is FYD164-M commonly used, and what still needs confirmation?

Confirm the complete FYD164-M group together with the 24V, 6.0kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on FYD164-M?

Confirm the complete FYD164-M group together with the 24V, 6.0kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched FYD164-M order?

Confirm the complete FYD164-M group together with the 24V, 6.0kW, 12-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering FYD164-M?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for FYD164-M?

Tie every carton and sampled unit to FYD164-M, the approved reference record and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 24V starter replace FYD164-M?

A substitute is acceptable only when its complete reference relationship, 24V system, 6.0kW rating, 12T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

How can buyers separate a FYD164-M fault from an equipment fault?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What makes a FYD164-M RFQ technically complete?

Send FYD164-M and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Request a B2B Quote for FYD164-M Starter Motors

Send the complete reference, catalog-specified heavy-duty equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.