FYD87-M 4M40 Equipment Starter Motor 12V 2.2kW 11T

FYD87-M 4M40 Equipment Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of FYD87-M starts with the 12V, 2.2kW, 11-tooth clockwise configuration and the stated use in 4M40 equipment applications. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

Treat FYD87-M as one controlled purchasing identity. Keep FYD87-M, 4M40 equipment applications, the approved dimensional record and the signed sample together in the sourcing file. If a future offer changes any suffix, rating or drive-end detail, reopen technical approval before comparing price or delivery. This keeps distributor quotations tied to the part actually reviewed rather than to a visually similar starter family.

FYD87-M Starter Motor B2B Production and Test Video for Aftermarket Buyers

This video introduces Elecdura starter-motor production and supply capabilities. Use the product-specific specification, reference and fitment evidence on this page as the purchasing control for FYD87-M.

FYD87-M Starter Motor Distributor Specifications for Fleet Replacement

FYD87-M Starter Motor Catalog Reference Review for Wholesale Supply

Use FYD87-M as the complete purchasing reference. Do not approve a substitute from voltage or appearance alone; the electrical rating, drive end, mounting geometry, pinion and terminal layout must match the removed unit or signed sample.

FYD87-M Starter Motor Bulk Fitment Approval for Distributor Sourcing

Before accepting FYD87-M as a replacement, obtain the full vehicle, machine or engine record and compare equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

FYD87-M Starter Motor Wholesale Receiving Inspection for Bulk Procurement

Receiving control should link the carton, unit label and inspection sample to FYD87-M. Verify reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

FYD87-M Starter Motor MOQ and Private-Label Supply for B2B Supply

FYD87-M Starter Motor Distributor FAQ for Aftermarket Buyers

What physical fitment checks are required for FYD87-M?

Compare the equipment and engine record, complete OE, mounting face, pinion position and terminal arrangement with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a FYD87-M bulk order?

Tie every carton and sampled unit to FYD87-M, the approved reference record and the supplier lot. Inspect reference label, electrical rating, drive end, mounting geometry, terminals, packing and lot traceability, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because an unverified substitute can stop equipment, generate a claim and turn a low unit price into a costly order. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as FYD87-M?

A substitute is acceptable only when its complete reference relationship, 12V system, 2.2kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a FYD87-M starter motor?

Check battery capacity, voltage drop, start signal, grounds, ring gear and mechanical engine load before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for FYD87-M?

Send FYD87-M and all visible OE or catalog references, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for FYD87-M procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede volume release when fitment evidence is incomplete. Mark the signed-off sample with FYD87-M, buyer application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for FYD87-M distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

What records support a fair FYD87-M warranty review?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product before instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

How can a distributor verify the FYD87-M starter configuration?

Use FYD87-M as a product-reference control reference, not as an OE interchange claim. The catalog specification narrows the candidate, but it does not prove vehicle or engine fitment. Keep the removed-unit label, drive-end photograph, mounting-face view, rear-terminal view and measured pinion data in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

Request a B2B Quote for FYD87-M Starter Motors

Send the complete reference, 4M40 equipment applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.