M008T55073 Fuso 4D34-2AT6 Starter Motor Wholesale

M008T55073 4D34-2AT6 Starter Wholesale Value for Fuso Buyers

This listing serves enquiries that identify the 4D34-2AT6 engine or M008T55073 marking. Keeping that detail visible gives sales, purchasing and warehouse teams a shared reason for maintaining a second product beside the broader 4D34 line.

The neighboring M008T55071 product uses the same power, tooth count and mounting values. Do not merge the two solely because dimensions match; preserve the exact old-unit number and 4D34-2AT6 engine evidence on this order.

M008T55073 Starter Mounting Data for B2B Product Separation

M008T55073 is defined as 12V, 3.6kW, 9T, module 3 and clockwise rotation. The complete line should remain on documents, but the engine suffix and exact primary reference create the commercial distinction.

M008T55073 Fuso 4D34-2AT6 Starter Drawing for Wholesalers — compare the drawing with the removed starter before placing a volume order.

Confirm two Ø13.5 holes, two M10 mounting points, a 145 mm circle, 60 mm engagement reference and 17 mm drive distance. Matching dimensions support the order while the M008T55073 and 4D34-2AT6 records keep it separate.

M008T55073 Reference Separation for Mitsubishi Distributors

M008T55073 shares ME015766, ME215097 and several aftermarket numbers with M008T55071. Use those for search, then retain the full M008T55073 marking and engine plate so the selected product remains traceable.

A distributor may store both products in adjacent locations, but labels should show primary reference and engine scope clearly. Branch transfers must carry the accepted image and application note to prevent casual substitution between the two lines.

M008T55073 Starter Supply Segregation and Electrical Testing

Receiving staff should check nine teeth, the mixed-hole face, terminals, label and carton marking. If a delivery is labeled M008T55071, hold it for comparison rather than assigning it automatically to the M008T55073 4D34-2AT6 stock line.

Fuso wholesalers can review Elecdura’s starter production and electrical testing in the video below. When M008T55073 and M008T55071 are both purchased, specify separate item labels, receiving samples and carton marks so the related 4D34 lines remain distinguishable.

M008T55073 Starter FAQs for Fuso 4D34-2AT6 Buyers

Why does 4D34-2AT6 remain in the M008T55073 product identity?

The 4D34-2AT6 suffix distinguishes the engine record used for this M008T55073 listing from the broader 4D34 line. It gives sales and warehouse teams a clear application key when the electrical rating and flange resemble M008T55071. Keep the suffix with the old-unit marking and photographs on quotations, labels and repeat orders.

Can shared ME015766 references merge M008T55073 with M008T55071?

No. ME015766 and other shared references help locate both products, but they do not erase the different primary numbers and engine records. Maintain M008T55073 with 4D34-2AT6 details and M008T55071 with its own 4D34 history. Merge stock only after the buyer has confirmed that both applications accept the same supplied unit.

What do matching flange dimensions prove for M008T55073?

Matching dimensions show that the M008T55073 face can be physically compared with the same mixed-hole geometry: two Ø13.5 holes, two M10 points, a 145 mm circle, 60 mm engagement reference and 17 mm drive distance. They do not prove the engine scope or primary identity, so 4D34-2AT6 and M008T55073 must remain recorded.

How should the two related Fuso starters be labeled in storage?

Use separate bin and carton labels headed by M008T55073 and M008T55071, then add the relevant engine scope beneath each primary number. Show 12V 3.6kW 9T and the mixed-hole face on both where accurate, but do not let shared ME references become the main label. Physical separation reduces casual substitution during picking.

What must follow an M008T55073 branch transfer?

Transfer documents should include M008T55073, the 4D34-2AT6 application, shipment lot, destination branch and quantity. Attach the accepted old-unit and flange photographs or make them available in the branch record. The receiving branch should verify the primary label and nine-tooth mixed-hole product before placing the transferred units into local stock.

When should a delivery be held instead of entering M008T55073 stock?

Hold the delivery when cartons show M008T55071 instead of M008T55073, the pinion is not 9T, the mixed-hole face differs, or terminals and rating do not match the accepted product. Damage to mounting ears, nose or studs also requires isolation. Record the lot and photographs before deciding whether the unit can serve another Fuso line.

Which evidence protects a 4D34-2AT6 repeat order?

Keep the 4D34-2AT6 engine plate, Fuso model and year, complete M008T55073 marking, and the accepted mounting, pinion and terminal photographs. Link them to the previous order and received lot. This package allows the next purchase to repeat the confirmed version even when shared ME015766 references bring M008T55071 into the search.

What makes an M008T55073 wholesale enquiry ready for pricing?

Provide the Fuso model, 4D34-2AT6 engine and chassis details, every readable M008T55073 reference, and clear views of the mixed-hole face, pinion and terminals. Add quantity, forecasted demand, packaging or labeling request, destination and delivery date. Elecdura can then confirm the intended 9T product and return relevant wholesale terms.

Request M008T55073 Fuso 4D34-2AT6 Wholesale Pricing

Email the 4D34-2AT6 engine plate, Fuso model and year, complete M008T55073 marking, mounting, pinion and terminal photographs, quantity and destination to info@elecdurauto.com. Elecdura will confirm the represented product and provide wholesale terms.