M008T60271A Mitsubishi 4D34 and Caterpillar Starter Motor 24V 4.5kW 14T

M008T60271A Mitsubishi 4D34 and Caterpillar Starter Motor Wholesale Supply for Distributors

For distributors and fleet-parts buyers, M008T60271A identifies a 24V, 4.5kW, 14-tooth clockwise configuration for Mitsubishi 4D34 and Caterpillar E70-series excavator applications. Approve the complete reference, rating, drive end, mounting face, pinion and terminals against the removed unit or signed sample so a nearby version is not substituted into the purchasing line.

M008T60271A Starter Motor B2B Production and Test Video for B2B Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating M008T60271A.

M008T60271A Starter Motor Distributor Specifications for Aftermarket Buyers

M008T60271A Starter Motor OE Cross-Reference Review for Fleet Replacement

Use M008T60271A as the primary purchasing reference and cross-check ME049186. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

M008T60271A Starter Motor Bulk Fitment Approval for Wholesale Supply

Confirm the complete M008T60271A / ME049186 group together with the 24V, 4.5kW, 14-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

M008T60271A Starter Motor Wholesale Receiving Inspection for Distributor Sourcing

For a wholesale shipment, sample units across the M008T60271A lot rather than inspecting only the top carton. Compare electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity with the approval record and document pass, fail and hold quantities. Do not mix a disputed suffix or drive-end version with cleared stock, even when the outer housing looks alike.

M008T60271A Starter Motor MOQ and Private-Label Supply for Bulk Procurement

M008T60271A Starter Motor Distributor FAQ for B2B Supply

Can M008T60271A be supplied with private-label packaging?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

How can distributors reduce disputes on M008T60271A claims?

The standard warranty is 18 months under agreed sales terms, but a claim still needs traceable evidence. Record the invoice or lot, installed application, old and supplied references, installation date, symptoms and electrical test results. Include photographs of the unit, terminals, mounting and pinion. Do not dismantle or discard the product prior to instructions are agreed. Complete evidence speeds technical review and prevents a battery, wiring or ring-gear problem from being misclassified.

Which OE numbers should a distributor match for M008T60271A?

Use M008T60271A as the control reference and compare the complete group M008T60271A / ME049186. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that supporting evidence to one quotation and purchase line so repeat orders remain traceable.

Where is M008T60271A commonly used, and what still needs confirmation?

Confirm the complete M008T60271A / ME049186 group together with the 24V, 4.5kW, 14-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

What specification mismatch creates the greatest risk on M008T60271A?

Confirm the complete M008T60271A / ME049186 group together with the 24V, 4.5kW, 14-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which configuration checks prevent a mismatched M008T60271A order?

Confirm the complete M008T60271A / ME049186 group together with the 24V, 4.5kW, 14-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance against the removed unit or approved sample and keep the signed sample with the purchase record.

Which mounting details should be compared before ordering M008T60271A?

Compare the machine serial range, engine plate, mounting nose, pinion position, terminal clocking and installed clearance with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

Which incoming-inspection points matter for M008T60271A?

Tie every carton and sampled unit to M008T60271A, the approved cross-reference set and the supplier lot. Inspect electrical rating, drive-end geometry, mounting bores, terminal position, housing protection and lot identity, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a fitment error can immobilize a machine, trigger emergency freight and extend paid downtime on site. This receiving discipline is cheaper than sorting returns after distribution.

Can a similar 24V starter replace M008T60271A?

A substitute is acceptable only when its complete OE relationship, 24V system, 4.5kW rating, 14T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Request a B2B Quote for M008T60271A Starter Motors

Send the complete reference, Mitsubishi 4D34 and Caterpillar E70-series excavator applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.