M008T62271 Fuso 6M60 Starter Motor Wholesale

M008T62271 Fuso 6M60 Starter Wholesale for Fleet Distributors

Fuso distributors often support trucks that cannot wait through a second delivery after an incorrect match. A useful enquiry combines the 6M60 engine identity, vehicle model, old-unit references and destination so the quotation reflects both fitment and the buyer's service deadline.

The 11T pinion and 5.5kW rating belong with an unusually broad Ø150 two-hole face and Ø110 locating diameter. Keeping those dimensions beside M008T62271 prevents a visually similar Mitsubishi heavy-duty starter from entering the same stock definition.

M008T62271 11T Starter Dimensions for B2B Matching

Use 24V, 5.5kW, 11T, module 3 and CW as the commercial specification for M008T62271. These values should stay visible on the quotation, carton label and warehouse description when stock moves between a central depot and fleet-service branches.

M008T62271 Fuso 6M60 Starter Drawing for Truck Parts Distributors — compare the drawing with the removed starter before placing a volume order.

Compare both Ø13.5 holes on the Ø150 circle, the Ø110 locating diameter and the 66 mm and 18 mm axial references. A straight drive-end photograph is particularly valuable because the large two-ear face is easier to distinguish from the front than from a side view.

M008T62271 Fuso and S760 Fitment Decisions for Buyers

M8T62271, M008T62271ZZ9, ME300682, 243-25216, S-438 and STM2271 widen the sourcing route. Buyers should still attach the 6M60 engine or confirmed S760 machine details so a cross reference never replaces the physical drive-end comparison.

For Fuso demand, record the truck model and 6M60 engine plate. An enquiry for John Deere S760 equipment should remain a separate fitment path with machine serial information and a mounting-face image, even when it arrives under the same M008T62271 reference.

M008T62271 6M60 Starter Supply Checks for Volume Orders

First-lot inspection should confirm eleven teeth, the two Ø13.5 holes, clean locating face, terminal orientation and secure support around the 5.5kW unit. Retain the accepted face, side and terminal photographs for later branch transfers and repeat orders.

Elecdura's production video shows starter assembly and electrical testing relevant to distributor programs. Fuso buyers can use it while discussing sampled electrical results, heavy-unit packing, neutral or branded cartons, lot identification and delivery timing for fleet coverage.

M008T62271 Starter FAQs for Fuso 6M60 Parts Buyers

What identifies a useful M008T62271 Fuso enquiry?

Identify the Fuso truck model, 6M60 engine plate, complete old-unit markings, delivery location and required date. Add square photographs of the drive end, pinion and terminals. This combination lets the quotation address the actual fleet requirement while preserving the Ø150 two-hole face and 11T module-3 construction.

Which drive-end dimensions separate this 6M60 starter?

The drive end uses two Ø13.5 holes on an Ø150 circle, an Ø110 locating diameter, and 66 mm and 18 mm axial references. These dimensions should agree with the removed starter before quantity is confirmed, because another Mitsubishi heavy-duty unit may look similar from the side.

Can M008T62271 also be quoted for John Deere S760 equipment?

Yes, when the S760 machine identity and removed starter support the same construction. Send the machine serial information, engine details and a straight mounting-face photograph. Keep that Deere enquiry separate from the Fuso 6M60 stock description until the two-hole face, 11T pinion and terminals have been matched.

How should ME300682 and M8T62271 support sourcing?

Use ME300682 and M8T62271 to widen the supplier search and compare markings, not as substitutes for the vehicle and drive-end evidence. A reliable purchase keeps the reference group tied to the 24V 5.5kW 11T definition, Ø150 face and confirmed 6M60 or S760 installation; keep this point with future M008T62271 orders for Mitsubishi Fuso trucks using the 6M60 engine.

What helps branches keep the correct 6M60 starter in stock?

Give every branch the same product line, accepted front photograph and terminal view. The bin description should retain M008T62271, 6M60, 11T module 3 and the Ø150 two-hole face. That shared evidence reduces mix-ups when a unit is transferred or reordered by a different buyer; keep this point with future M008T62271 orders for Mitsubishi Fuso trucks using the 6M60 engine.

Which checks belong in the first M008T62271 delivery?

Count eleven teeth, inspect both Ø13.5 holes and the Ø110 locating surface, then compare terminal positions and labels with the accepted sample. Carton support should prevent the heavy starter from striking its drive end. Record the sampled electrical result and photographs before distributing the lot.

What vehicle-side checks help before replacing a Fuso starter?

Check battery state, cable voltage drop, grounds, starter relay and the engine's ability to turn freely before removing the unit. A weak supply circuit can imitate starter failure. When replacement remains necessary, keep the measured drive end and terminal layout with the M008T62271 request; keep this point with future M008T62271 orders for Mitsubishi Fuso trucks using the 6M60 engine.

Which details help Elecdura return wholesale terms quickly?

Provide the truck or S760 identity, 6M60 engine information where applicable, all readable numbers, face and terminal photographs, order quantity, destination, packing preference and required date. These inputs let Elecdura evaluate M008T62271, quote the appropriate volume level and state a realistic delivery schedule; keep this point with future M008T62271 orders for Mitsubishi Fuso trucks using the 6M60 engine.

Request M008T62271 Fuso Starter Motor Wholesale Pricing

Send the Fuso model, 6M60 engine plate, old-starter numbers, clear drive-end and terminal photographs, quantity, destination and required date to info@elecdurauto.com. Elecdura will review the M008T62271 configuration and return wholesale pricing and lead time.