M2T78682 Nissan UD MK150 Starter Motor 24V 4.5kW 11T

M2T78682 Nissan UD MK150 Starter Motor Wholesale Supply

For distributors and fleet-parts buyers, M2T78682 defines a 24V starter family used in Nissan UD MK150 and related FD42, FD46 and FD46T truck applications. Approve the 4.5kW, 11-tooth clockwise version only when the complete reference, drive end, mounting face, pinion position and terminal arrangement match the removed unit or signed sample, because nearby M2T variants may use a different output or mechanical configuration.

M2T78682 Starter Motor B2B Production and Test Video for Wholesale Supply

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating M2T78682.

M2T78682 Starter Motor Distributor Specifications for Distributor Sourcing

M2T78682 Starter Motor OE Cross-Reference Review for Bulk Procurement

Use M2T78682 as the primary purchasing reference and cross-check M2T78681, S25-303, 23300-0T005, 23300-0T006 and 19978. These numbers help identify the starter family, but the complete suffix and physical geometry must match the removed unit or signed sample before interchangeability is approved.

M2T78682 Starter Motor Bulk Fitment Approval for B2B Supply

Before accepting M2T78682 as a replacement, obtain the full vehicle, machine or engine record and compare VIN or chassis record, engine, production range, mounting face, pinion and cable route. Cross-reference overlap is useful for finding the family, but it cannot replace a physical match. Store the approved label and four-angle photo set with the account so later orders use the same configuration.

M2T78682 Starter Motor Wholesale Receiving Inspection for Aftermarket Buyers

Receiving control should link the carton, unit label and inspection sample to M2T78682. Verify label and suffix, voltage, power, teeth, mounting clocking, terminal layout and carton traceability; photograph deviations and keep affected units separate while the supplier responds. Batch evidence makes repeat purchases more predictable and gives warranty teams a clear record if field feedback appears.

M2T78682 Starter Motor MOQ and Private-Label Supply for Fleet Replacement

M2T78682 Starter Motor Distributor FAQ for Wholesale Supply

Which electrical and drive specifications define M2T78682?

The specified configuration is 24V, 4.5kW, 11T and clockwise rotation. Voltage must match the equipment electrical system, while output, tooth count and rotation affect cranking performance and ring-gear engagement. A starter can look correct in a photograph yet be unsuitable electrically or mechanically. Put all four values on the sample-approval sheet and verify the physical pinion before releasing a distributor quantity.

Why is suffix-level verification important for M2T78682?

M2T78682-family references can appear with different power ratings and drive-end details. Confirm the complete label and suffix, then compare the 24V, 4.5kW, 11-tooth clockwise specification, mounting face, pinion position and terminals with the removed unit. Keep the accepted sample and photos with the purchase record so a nearby M2T variant is not substituted during repeat supply.

What physical fitment checks are required for M2T78682?

Compare the VIN or chassis document, engine, production range, mounting face, pinion and cable route with the removed starter. Inspect bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment document is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

What receiving checks protect a M2T78682 bulk order?

Tie every carton and sampled unit to M2T78682, the approved cross-reference set and the supplier lot. Inspect label and suffix, voltage, power, teeth, mounting clocking, terminal layout and carton traceability, then compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong unit can create roadside downtime, a repeat workshop job and expensive urgent transport. This receiving discipline is cheaper than sorting returns after distribution.

Should a visually similar starter be sold as M2T78682?

A substitute is acceptable only when its complete OE relationship, 24V system, 4.5kW rating, 11T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit evidence, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

What should be diagnosed before replacing a M2T78682 starter motor?

Check battery test, loaded cranking voltage, positive and ground drop, start-control circuit and flywheel teeth prior to condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

How should a distributor request B2B pricing for M2T78682?

Send M2T78682 and all visible OE numbers, the full application or engine document, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

What approval sequence is recommended for M2T78682 procurement?

The standard MOQ is 20 pieces, subject to final order confirmation, and a sample or pre-production approval should precede batch release when fitment evidence is incomplete. Mark the approved sample with M2T78682, procurement team application and revision date. Repeat orders should reference that same approval plus any packaging specification. If the supplier, suffix or physical design changes, treat it as a new approval rather than assuming the previous decision still applies.

What packaging options are available for M2T78682 distributors?

Neutral packaging and private-label review are available for qualified orders. The carton and inner protection should prevent movement, terminal damage and contamination while keeping the product reference, lot identity and quantity readable. Private-label artwork must not remove the technical identifiers used for fitment and claims. Agree label content, barcode needs, carton strength and destination handling before production so the packaging supports both sales presentation and receiving control.

Request a B2B Quote for M2T78682 Starter Motors

Send the complete reference, Nissan UD MK150, FD42, FD46 and FD46T truck applications, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.