Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Mitsubishi-Type 12V 2.2kW 10T CW
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Mitsubishi-type truck, equipment and industrial replacement programs
Confirm battery-terminal position, mounting face, pinion position, rotation and terminals against the removed unit or approved sample.
| Quantity: | |
|---|---|
service networks can use Mitsubishi-Type 12V 2.2kW 10T CW as a defined starting point for replacement approval and volume sourcing.
Mitsubishi-type truck, equipment and industrial replacement programs is the working supply scope. Confirm Mitsubishi-Type 12V 2.2kW 10T CW plus removed-unit photos and dimensions, battery-terminal position, mounting geometry, pinion position and terminal access before releasing distributor stock.
The video introduces Elecdura production, inspection and B2B supply capabilities; the product release remains governed by the specification and approval controls below.
Specification | B2B ordering control for Mitsubishi-Type 12V 2.2kW 10T CW |
Product identity | Mitsubishi-Type 12V 2.2kW 10T CW |
OE / reference control | Mitsubishi-Type 12V 2.2kW 10T CW plus removed-unit photos and dimensions |
Application scope | Mitsubishi-type truck, equipment and industrial replacement programs |
System voltage | 12V |
Rated power | 2.2kW |
Pinion | 10T Ø38.5 |
Rotation | CW / clockwise |
Physical approval | Compare battery-terminal position, mounting pattern, drive-end depth, pinion position and terminal layout with the removed unit or signed sample. |
MOQ | 20 pcs, subject to final order confirmation |
Normal lead time | 7 - 15 days after order confirmation |
Warranty | 18 months under agreed sales terms |
Mitsubishi-Type 12V 2.2kW 10T CW is offered through configuration and sample matching. Because no public OE is assigned on this page, the buyer should use the removed starter, machine record, measurements and clear images as the order controls rather than treating a general type description as final fitment proof.
Approval point | Mitsubishi-Type 12V 2.2kW 10T CW distributor release record |
Identity check | Mitsubishi-Type 12V 2.2kW 10T CW plus removed-unit photos and dimensions |
Electrical review | 12V; 2.2kW; CW / clockwise |
Mechanical review | 10T Ø38.5; battery-terminal position; mounting face and terminal clocking |
Application link | Mitsubishi-type truck, equipment and industrial replacement programs |
Release evidence | signed dimensional sheet |
Release fitment only when electrical rating, rotation, pinion, mounting face and battery-terminal position agree with the removed unit. Record the decision in a signed dimensional sheet so future replenishment does not depend on memory or a cropped photograph.
At receiving, confirm outer-carton identity, sampled labels, mounting surfaces, pinion protection, terminal security and battery-terminal position. Keep lot photographs and dimensional results with the purchase record so claims can be traced quickly.
Elecdura supports a 20-piece MOQ, normal 7 - 15 day lead time and 18-month warranty under agreed terms for Mitsubishi-Type 12V 2.2kW 10T CW. Neutral packaging is standard; private-label review is available for qualified orders after the product configuration and artwork are approved.
B2B item | Supply arrangement for Mitsubishi-Type 12V 2.2kW 10T CW |
Order position | Aftermarket replacement supplied against an approved configuration |
MOQ | 20 pcs |
Lead time | 7 - 15 days, subject to order confirmation |
Packaging | Neutral packaging or private-label review for qualified orders |
Receiving control | Check carton identity, battery-terminal position, pinion protection, terminals and sampled dimensions. |
Warranty | 18 months under agreed sales terms |
RFQ pack | Quantity, destination, application record, old-unit photos and signed dimensional sheet |
Use the removed assembly or signed sample as the common reference for sales, production and receiving. Confirm Mitsubishi-Type 12V 2.2kW 10T CW plus removed-unit photos and dimensions, then compare 12V system voltage, 2.2kW rated output, 10T Ø38.5 pinion, CW / clockwise with the removed starter. Finish the approval with battery-terminal position, the mounting pattern and terminal accessibility. That record gives service networks a practical way to separate visually similar units before warehouse release.
For a volume order, every department should work from one controlled configuration file. Verify nominal voltage from the machine record and starter label, then review rated output, cable size, battery condition and the control-terminal arrangement. Do not assume that a housing with a similar outline uses the same electrical package or cranking requirement. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
Start with the buyer's original unit rather than a shortened description. Count the teeth, measure the available outside diameter and compare the pinion's rest and engaged positions with the old unit. A tooth-count match alone does not confirm ring-gear engagement, drive travel, nose clearance or the correct direction of operation. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
Treat the purchase record as a fitment-control document, not only a price request. Provide the number of mounting holes, center distances, register diameter, drive-end depth and usable clearance around the solenoid and terminals. Add square-on photographs from the flange, pinion and terminal sides so production can review battery-terminal position before sample release. This discipline helps service networks reduce wrong-fit returns without relying on a partial label match.
A repeatable approval process begins with the complete electrical and mechanical record. A photo is useful for screening, but it should be combined with the complete label, application or machine record, electrical rating and physical measurements. When an external reference is unavailable, use signed dimensional sheet and approve one sample before committing distributor inventory. Keep the result with the purchase order so service networks can repeat the same approval at replenishment.
The safest wholesale decision links product identity, physical geometry and the application record. Check the label, overall workmanship, free pinion movement, mounting surfaces, terminal security and rotation under the agreed test condition. Compare the sample with the signed record for battery-terminal position, then retain the approved result as the standard for the production and receiving teams. That record gives service networks a practical way to separate visually similar units before warehouse release.
Before stock is released, the quotation and inspection record should describe the same configuration. Link the carton label to the purchase order and approved configuration, then sample-check external damage, mounting face, pinion, terminal protection and key dimensions. Record lot details and photographs before items enter saleable stock so later claims can be traced to a defined shipment. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
Use the removed assembly or signed sample as the common reference for sales, production and receiving. Send required quantity, destination, packaging preference, expected order timing and the technical approval pack. Include old-unit images and equipment details when available, and identify any private-label or barcode requirement early so commercial and production reviews follow the same scope. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
For a volume order, every department should work from one controlled configuration file. Neutral packaging is standard for qualified orders, while private-label review depends on quantity and artwork approval. Warranty follows the agreed sales terms; preserve installation findings, battery and cable checks, failed-unit images and lot identification so any claim can be evaluated against the approved configuration. This discipline helps service networks reduce wrong-fit returns without relying on a partial label match.
For a quotation, send quantity, destination, target order date, packaging requirements and the application or equipment record for Mitsubishi-Type 12V 2.2kW 10T CW. Add old-unit photographs and signed dimensional sheet; this lets the sales and technical teams review the same scope before sample or volume release.
