Your Whole New Supply Chain For Heavy-Duty Parts
Whatsapp：
+86 18915027366
Phone：
+86 18915027366
Mitsubishi-Type 12V 3.0kW 10T CW
Elecdura
Available for qualified orders
20 pcs
7 - 15 Days
Neutral packaging / private-label review
18 Months
Mitsubishi-type truck, equipment and industrial replacement programs
Confirm pinion outside diameter, mounting face, pinion position, rotation and terminals against the removed unit or approved sample.
| Quantity: | |
|---|---|
Mitsubishi-Type 12V 3.0kW 10T CW supports a sample-led sourcing workflow for industrial parts dealers managing mixed starter inventories.
Mitsubishi-type truck, equipment and industrial replacement programs is the working supply scope. Confirm Mitsubishi-Type 12V 3.0kW 10T CW plus removed-unit photos and dimensions, pinion outside diameter, mounting geometry, pinion position and terminal access before releasing distributor stock.
Use this production overview to understand Elecdura supply capability, then approve the exact unit through the page specification, old-unit comparison and signed sample record.
Specification | B2B ordering control for Mitsubishi-Type 12V 3.0kW 10T CW |
Product identity | Mitsubishi-Type 12V 3.0kW 10T CW |
OE / reference control | Mitsubishi-Type 12V 3.0kW 10T CW plus removed-unit photos and dimensions |
Application scope | Mitsubishi-type truck, equipment and industrial replacement programs |
System voltage | 12V |
Rated power | 3.0kW |
Pinion | 10T Ø39 |
Rotation | CW / clockwise |
Physical approval | Compare pinion outside diameter, mounting pattern, drive-end depth, pinion position and terminal layout with the removed unit or signed sample. |
MOQ | 20 pcs, subject to final order confirmation |
Normal lead time | 7 - 15 days after order confirmation |
Warranty | 18 months under agreed sales terms |
Mitsubishi-Type 12V 3.0kW 10T CW is offered through configuration and sample matching. Because no public OE is assigned on this page, the buyer should use the removed starter, machine record, measurements and clear images as the order controls rather than treating a general type description as final fitment proof.
Approval point | Mitsubishi-Type 12V 3.0kW 10T CW distributor release record |
Identity check | Mitsubishi-Type 12V 3.0kW 10T CW plus removed-unit photos and dimensions |
Electrical review | 12V; 3.0kW; CW / clockwise |
Mechanical review | 10T Ø39; pinion outside diameter; mounting face and terminal clocking |
Application link | Mitsubishi-type truck, equipment and industrial replacement programs |
Release evidence | cross-reference approval sheet |
Match the complete installed envelope, not only the motor body. Check drive-end depth, flange register, pinion travel, pinion outside diameter and cable access, then link the accepted result to the buyer's equipment or application record.
Receiving teams should sample-check the agreed configuration before warehousing. Review labels, castings, mounting face, pinion movement, terminals and pinion outside diameter, then isolate any variance from the approved sample.
Elecdura supports a 20-piece MOQ, normal 7 - 15 day lead time and 18-month warranty under agreed terms for Mitsubishi-Type 12V 3.0kW 10T CW. Neutral packaging is standard; private-label review is available for qualified orders after the product configuration and artwork are approved.
B2B item | Supply arrangement for Mitsubishi-Type 12V 3.0kW 10T CW |
Order position | Aftermarket replacement supplied against an approved configuration |
MOQ | 20 pcs |
Lead time | 7 - 15 days, subject to order confirmation |
Packaging | Neutral packaging or private-label review for qualified orders |
Receiving control | Check carton identity, pinion outside diameter, pinion protection, terminals and sampled dimensions. |
Warranty | 18 months under agreed sales terms |
RFQ pack | Quantity, destination, application record, old-unit photos and cross-reference approval sheet |
For a volume order, every department should work from one controlled configuration file. Confirm Mitsubishi-Type 12V 3.0kW 10T CW plus removed-unit photos and dimensions, then compare 12V system voltage, 3.0kW rated output, 10T Ø39 pinion, CW / clockwise with the removed starter. Finish the approval with pinion outside diameter, the mounting pattern and terminal accessibility. This discipline helps industrial parts dealers improve receiving consistency without relying on a partial label match.
Start with the buyer's original unit rather than a shortened description. Verify nominal voltage from the machine record and starter label, then review rated output, cable size, battery condition and the control-terminal arrangement. Do not assume that a housing with a similar outline uses the same electrical package or cranking requirement. Keep the result with the purchase order so industrial parts dealers can repeat the same approval at replenishment.
Treat the purchase record as a fitment-control document, not only a price request. Count the teeth, measure the available outside diameter and compare the pinion's rest and engaged positions with the old unit. A tooth-count match alone does not confirm ring-gear engagement, drive travel, nose clearance or the correct direction of operation. That record gives industrial parts dealers a practical way to separate visually similar units before warehouse release.
A repeatable approval process begins with the complete electrical and mechanical record. Provide the number of mounting holes, center distances, register diameter, drive-end depth and usable clearance around the solenoid and terminals. Add square-on photographs from the flange, pinion and terminal sides so production can review pinion outside diameter before sample release. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
The safest wholesale decision links product identity, physical geometry and the application record. A photo is useful for screening, but it should be combined with the complete label, application or machine record, electrical rating and physical measurements. When an external reference is unavailable, use cross-reference approval sheet and approve one sample before committing distributor inventory. A controlled comparison protects both the buyer's installation schedule and the supplier's production release.
Before stock is released, the quotation and inspection record should describe the same configuration. Check the label, overall workmanship, free pinion movement, mounting surfaces, terminal security and rotation under the agreed test condition. Compare the sample with the signed record for pinion outside diameter, then retain the approved result as the standard for the production and receiving teams. This discipline helps industrial parts dealers improve receiving consistency without relying on a partial label match.
Use the removed assembly or signed sample as the common reference for sales, production and receiving. Link the carton label to the purchase order and approved configuration, then sample-check external damage, mounting face, pinion, terminal protection and key dimensions. Record lot details and photographs before items enter saleable stock so later claims can be traced to a defined shipment. Keep the result with the purchase order so industrial parts dealers can repeat the same approval at replenishment.
For a volume order, every department should work from one controlled configuration file. Send required quantity, destination, packaging preference, expected order timing and the technical approval pack. Include old-unit images and equipment details when available, and identify any private-label or barcode requirement early so commercial and production reviews follow the same scope. That record gives industrial parts dealers a practical way to separate visually similar units before warehouse release.
Start with the buyer's original unit rather than a shortened description. Neutral packaging is standard for qualified orders, while private-label review depends on quantity and artwork approval. Warranty follows the agreed sales terms; preserve installation findings, battery and cable checks, failed-unit images and lot identification so any claim can be evaluated against the approved configuration. The signed result should remain linked to the quotation, sample and receiving lot for traceability.
For a quotation, send quantity, destination, target order date, packaging requirements and the application or equipment record for Mitsubishi-Type 12V 3.0kW 10T CW. Add old-unit photographs and cross-reference approval sheet; this lets the sales and technical teams review the same scope before sample or volume release.
