19080037 Daewoo 340 215-9 Starter Motor Wholesale

19080037 Starter Motor Wholesale Application Support for Daewoo 340 and 215-9 excavator

For Daewoo 340 and 215-9 excavator, 19080037 gives distributors a focused starting point for quotation and branch inventory. Confirm 24V, 7.5kW, 11T and CW, with particular attention to 24V 7.5kW 11T module-3 Daewoo 340/215-9 specified configuration, before combining demand from different fleets or workshops.

Build the 19080037 RFQ around the complete removed-unit number, exact machine or engine information, mounting-face and terminal-side photographs, quantity and delivery point. These details let Elecdura quote the specified starter, export packing and timing without turning the offer into a general application guess.

19080037 Starter Motor Specifications and Drawing for Wholesale Buyers

Check the 19080037 drawing against the removed starter at the mounting face and drive end. The critical references are 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter, Ø127 mm mounting-hole circle and 48 mm drive-end distance. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

Complete the 19080037 comparison with 24V, 7.5kW, the 11T drive, module 3 and CW rotation. Review pinion condition, terminal location and available cable clearance together. These controls prevent a valid OE search result from being treated as automatic physical interchangeability.

19080037 Starter Motor OE Cross-References for Distributor Enquiries

The 19080037 cross-reference group includes 19080037, 500284, DRS0977N, 30051600055A, 30051600055C. Use these numbers to search supplier systems, then confirm 24V, 7.5kW, 11T, CW, mounting geometry and terminals.

For 19080037, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

19080037 Starter Motor Fleet Supply and Replenishment Support

Distributors can combine an initial 19080037 sample plan with a later replenishment forecast. MOQ is 20 pieces, normal lead time is 7–15 days after confirmation and warranty is 18 months under agreed terms; packing and shipping are quoted for the actual route and arrival requirement.

Stock planning should reflect the supported Daewoo 340 and 215-9 excavator population, recent consumption and transfer time between service locations. Keeping 19080037, the 11T drive and the approved mounting interface visible in the inventory record reduces emergency substitution and improves later reorder accuracy.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of 19080037 remains tied to the stated Daewoo 340 and 215-9 excavator application, 11T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

19080037 Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving 19080037 during a Daewoo 340 215-9 service-network receiving check?

For 19080037, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and the specified 11T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What fitment evidence makes a quotation for 19080037 reliable during service-network sourcing?

Use the full old-unit number and Daewoo 340 and 215-9 excavator record. Compare the 11T pinion, 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

How should a mixed-reference enquiry for 19080037 be prepared in a Daewoo 340 215-9 service-network sourcing program?

Cross-references help purchasing teams search different brand systems, but the order should still resolve to one physical starter. Compare the candidate number with the 19080037 electrical rating, pinion and drawing. Keep unmatched housings, terminal positions or drive ends on separate RFQ lines so the supplier can price them correctly.

Before removing 19080037, what should the workshop test under load during a Daewoo 340 215-9 service-network electrical check?

Before fitting 19080037, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

What physical controls belong on a first-lot check for 19080037 during a Daewoo 340 215-9 service-network inspection?

For 19080037, compare 3 mounting holes shown as 11, 11, 11 mm and Ø127 mm mounting-hole circle in a straight front view, then Ø89 mm locating diameter and 48 mm drive-end distance in the side view. Add 11T, CW and terminal orientation; this is more reliable than an angled overall photograph.

How should Delco distributors plan stock for 19080037 in a Daewoo 340 215-9 service-network program?

Separate 340 and 215-9 service stock from other Delco 38MT-style units. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for 19080037 in a Daewoo 340 215-9 service-network sourcing program?

A useful RFQ states 19080037, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving 19080037 in a Daewoo 340 215-9 service-network review?

For a service review of 19080037, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

19080037 Request Starter Motor Wholesale Pricing

Email info@elecdurauto.com with 19080037, the supported Daewoo 340 and 215-9 excavator record, old-unit photographs, quantity, destination and required arrival date. Elecdura will use those details to confirm the 24V, 7.5kW, 11T CW starter and prepare wholesale pricing with MOQ, lead time, packing and freight.