2995372 Iveco EuroStar 260E Starter Motor Wholesale

2995372 Iveco EuroStar Starter Wholesale for Legacy Fleets

Older EuroStar and 260E trucks may serve specialist fleets in markets where local replacement choice is limited. Buyers should identify model year, chassis, engine and current starter before export so a slow-moving part arrives as a usable replacement rather than uncertain shelf stock.

This product uses a 12T module-3.175 drive and an Ø146 three-hole mounting circle. A related Iveco heavy-duty starter can share the electrical rating while using an Ø127 face, so flange size must remain visible in every quotation.

2995372 12T Starter Dimensions for Commercial Parts Buyers

Identify 2995372 as 24V, 5.5kW, 12T, module 3.175 and CW. Pair that specification with the 1993–2002 EuroStar or 260E vehicle details on purchase orders, labels and export packing lists.

2995372 Iveco EuroStar Starter Drawing for Legacy Truck Buyers — compare the drawing with the removed starter before placing a volume order.

Verify three Ø13 holes on the Ø146 circle, the Ø92 locating diameter, and 48 mm and 18 mm drive-end references. Because an older truck may carry a rebuilt unit, request straight photographs of the full face, pinion and terminal side.

2995372 M009T61671 Matching for Iveco Export Supply

42498715, 504042667, M009T61671, M009T67671 and M009T69371 provide practical routes for sourcing 2995372. The year range, truck model and confirmed Ø146 face should decide whether a reference belongs to the requested product.

Legacy-parts wholesalers can stock against known fleet populations and historical demand rather than broad Iveco coverage. Save the accepted vehicle and starter images with the customer account so an occasional repeat order remains clear after a long interval.

2995372 EuroStar Starter Stock Checks for Repeat Orders

For export receipt, inspect twelve teeth, flange ears, locating face, terminal insulation, label condition and fitted carton support. Photograph a sampled unit before repacking or distribution so later questions can be resolved against the shipped configuration.

Elecdura's video presents starter assembly and electrical testing for B2B supply. Legacy Iveco buyers can use it when discussing sample checks, neutral or private-label packing, pallet protection and consolidated export delivery.

2995372 Starter FAQs for Iveco EuroStar Parts Buyers

Which EuroStar or 260E details should accompany 2995372?

Provide the Iveco EuroStar or 260E model, year, chassis and engine, plus all numbers on the removed starter. Add square mounting-face, pinion and terminal photographs, quantity and destination. These details help Elecdura match 2995372 to the actual 1993–2002 vehicle instead of assuming every older Iveco truck in the reference family uses the same product.

Why should the 1993–2002 vehicle range remain visible?

The 1993–2002 range gives buyers a practical application boundary for the EuroStar and 260E vehicles represented by this product. Keep the exact model year and chassis on the enquiry because older fleets may contain earlier or later versions and previous service replacements. The year range supports identification but does not replace the starter’s physical comparison.

What should buyers compare on the Ø146 mounting drawing?

Compare the three Ø13 holes on the Ø146 circle, the Ø92 locating diameter, and 48 mm and 18 mm drive-end references with the removed starter. Add a direct face view, pinion close-up and terminal-side image. These checks separate 2995372 from an Iveco 24V 5.5kW starter that uses the smaller Ø127 flange.

How should M009T61671 and 42498715 support the match?

Use M009T61671, M009T67671, M009T69371, 42498715 and 504042667 to find possible replacements for 2995372. Keep the EuroStar or 260E identity, 24V 5.5kW 12T module-3.175 specification and Ø146 face attached to the order. One reference should support the search, not override a conflicting physical configuration during purchasing or receiving.

How can a legacy-parts wholesaler size 2995372 stock?

Base stock on known EuroStar and 260E fleet populations, historical demand, inbound lead time and the cost of sourcing after a breakdown. One inspected service unit may be more useful than broad speculative inventory. Store the confirmed vehicle and starter images with the customer account so an occasional reorder remains clear after a long interval.

Which checks matter after an export shipment arrives?

Count twelve teeth and inspect the three Ø13 holes, locating face, nose casting, terminal insulation and label when the shipment arrives. Compare a sampled unit with the accepted front and cable-side photographs, and check carton supports for movement or impact. Record the condition before units are repacked, consolidated or sent to regional customers.

What if the truck carries a rebuilt or relabeled starter?

Treat the installed number as one clue, because rebuilding can change labels, solenoids or housings. Compare the EuroStar or 260E chassis, 12T module-3.175 pinion, Ø146 flange, locating diameter and terminal positions with the removed unit. Clear photographs from several angles are more dependable than copying a number from an old invoice or painted casing.

What makes a 2995372 wholesale enquiry actionable?

Send the vehicle year, chassis, engine, all Iveco and Mitsubishi references, and clear mounting, pinion and terminal photographs. Add quantity, destination, delivery deadline and packing preference. Elecdura can then review the 24V 5.5kW 12T module-3.175 Ø146 configuration and provide wholesale pricing, export packing options and realistic lead time.

Request 2995372 Iveco EuroStar Starter Wholesale Pricing

Email the EuroStar or 260E model year, chassis and engine, all readable old-starter numbers, mounting and terminal photographs, quantity, packing request and destination to info@elecdurauto.com. Elecdura will review 2995372 and return wholesale terms.