10479629 New Holland D150 Starter Motor Wholesale

10479629 Starter Motor Wholesale Application Support for New Holland D150 equipment with Cummins engines

For New Holland D150 equipment with Cummins engines, 10479629 gives distributors a focused starting point for quotation and branch inventory. Confirm 24V, 4.5kW, 10T and CW, with particular attention to 24V 4.5kW 10T module-2.54 configuration for the D150 catalog application, before combining demand from different fleets or workshops.

Separate different old-unit numbers from the 10479629 enquiry and attach images for each configuration. State which line is a sample and which is a replenishment quantity, together with destination and timing. This gives the quotation a practical fitment boundary and a realistic packing and delivery plan.

10479629 Starter Motor Mounting Reference for Commercial Buyers

Check the 10479629 drawing against the removed starter at the mounting face and drive end. The critical references are 3 × Ø11 mounting holes, Ø89 locating diameter, Ø127 mounting-hole circle and 46 mm distance to drive gear. A physical mismatch should stop the unit from entering ordinary stock until the application is clarified.

The 10479629 drive-end decision is completed by 10T, module 2.54 and CW, together with 24V and 4.5kW. Confirm main-terminal and control-terminal positions under the actual cable routing. Similar dimensions do not compensate for the wrong rotation, pinion or electrical rating.

10479629 Starter Motor Cross-Reference Boundary for Importers

The 10479629 cross-reference group includes 114710, 76193688, 3282731, 3285750, 3675207, 3675207RX, 10465405. These numbers improve search coverage across fleets and supplier systems, but they do not replace a check of 24V, 4.5kW, 10T, CW, mounting geometry and terminals.

If a mixed 10479629 enquiry contains different pinions, drive positions or connector layouts, list each complete reference and photograph separately. Elecdura can then return distinct offers instead of placing unlike starters under one broad reference family.

10479629 Starter Motor Wholesale Ordering and Export Support

Elecdura can prepare 10479629 orders for regional inventory, fleet workshops or industrial service demand. The standard starting point is 20 pieces, normally 7–15 days after order confirmation, with an 18-month warranty under agreed terms and packing selected for the destination and shipment method.

Buyers can state service urgency, supported equipment count and expected monthly use in the same RFQ. Elecdura can then discuss stock, production, packaging and staged delivery while maintaining the specified 10479629 drive end and electrical rating throughout the order.

For supplier evaluation, the video presents Elecdura starter-motor assembly and testing. A 10479629 order should still be released against the complete OE number, New Holland D150 equipment with Cummins engines details, electrical specification and physical comparison, giving purchasing both capability information and a clear product boundary.

10479629 Starter Motor Questions from Commercial Buyers

Which first-lot checks protect a distributor receiving 10479629 during a New Holland D150 service-network receiving check?

For 10479629, count the cartons, compare labels and inspect selected units for flange, pinion and terminal damage. The sample should match 3 × Ø11 mounting holes, Ø89 locating diameter and the specified 10T drive. Hold any exception outside normal inventory until purchasing and the supplier agree on the correct disposition.

What fitment evidence makes a quotation for 10479629 reliable during service-network sourcing?

Use the complete removed-unit number and exact New Holland D150 equipment with Cummins engines record. Compare the 10T pinion, 3 × Ø11 mounting holes, Ø89 locating diameter and terminal side with the old starter. A housing resemblance is insufficient when the drive position, mounting face or cable connection differs.

How should a mixed-reference enquiry for 10479629 be prepared in a New Holland D150 service-network sourcing program?

Cross-references help purchasing teams search different brand systems, but the order should still resolve to one physical starter. Compare the candidate number with the 10479629 electrical rating, pinion and drawing. Keep unmatched housings, terminal positions or drive ends on separate RFQ lines so the supplier can price them correctly.

Before removing 10479629, what should the workshop test under load in a New Holland D150 service-network workshop?

Before fitting 10479629, verify battery condition, cable size and voltage drop at cranking current. Clean the mounting ground and inspect the ring gear and control circuit. A slow-crank complaint can come from weak batteries, poor connections or mechanical drag, so those causes should be separated from the starter itself.

What physical controls belong on a first-lot check for 10479629 during a New Holland D150 service-network inspection?

For 10479629, use a straight front view to compare the 3 × Ø11 mounting holes and Ø127 mounting-hole circle; use the side view for Ø89 locating diameter and 46 mm distance to drive gear. Complete the check with 10T, CW and terminal orientation. This combination is more reliable than an angled overall photograph alone.

How should New Holland distributors plan stock for 10479629 in a New Holland D150 service-network program?

Set field-service stock from supported machine utilization and lead time rather than from fleet count alone. Add recent usage, equipment population, transfer time and service level. Elecdura can then separate sample, emergency and replenishment quantities and plan packing or staged delivery around the buyer’s schedule.

What information should accompany a distributor RFQ for 10479629 in a New Holland D150 service-network sourcing program?

A useful RFQ states 10479629, the machine or engine model, old-unit label, mounting and terminal photographs, requested quantity and delivery country. Include whether the demand is a sample, urgent service order or scheduled stock. Those details allow pricing to cover the correct unit and realistic shipping plan.

What evidence separates an electrical-system fault from a concern involving 10479629 in a New Holland D150 service-network review?

For a service review of 10479629, identify the shipment and unit, describe the starting condition and record installation details. Add photographs of the drive, flange and terminals plus battery, ground and positive-cable test results. If the unit was removed, protect it from additional damage and retain it until the review is complete.

10479629 Email for Starter Motor B2B Pricing

A complete RFQ for 10479629 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 4.5kW 10T CW starter, MOQ, packaging, warranty and shipping choices.