300N10464 New Holland Starter Motor 12V 232kW 10T

300N10464 New Holland Starter Motor Sourcing Control for Wholesale Buyers

B2B approval of 300N10464 starts with the 12V, 232kW, 10-tooth clockwise configuration and the stated use in New Holland vehicles and equipment cross-referenced to 300N10464. Confirm the complete label, flange, drive-end geometry, pinion and terminal position before a sample or production lot is released for the buyer's stock.

For repeat sourcing of 300N10464, use 300N10464 / 4280007360 / 504357253 / 87750408 as search evidence and New Holland vehicles and equipment cross-referenced to 300N10464 as the application checkpoint. Neither item replaces measurement of the removed starter. Archive the approved sample photos, key dimensions, carton label and inspection date under one buyer part number so purchasing, warehouse and warranty teams work from the same physical definition.

300N10464 Starter Motor B2B Production and Test Video for Bulk Procurement

This video introduces Elecdura starter-motor production and supply capabilities. Use the specification, cross-reference details and fitment checks on this page when evaluating 300N10464.

300N10464 Starter Motor Distributor Specifications for B2B Supply

300N10464 Starter Motor OE Cross-Reference Review for Aftermarket Buyers

Use 300N10464 as the primary purchasing reference and cross-check 4280007360, 504357253, 87750408. These numbers identify the candidate starter family, but approval still requires the exact suffix, electrical rating, drive end, mounting geometry, pinion and terminal layout to match the removed unit or signed sample.

300N10464 Starter Motor Bulk Fitment Approval for Fleet Replacement

Fitment control for 300N10464 starts with the old starter and the application record. Compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation, and do not force a unit into position with the mounting bolts. If the reference family includes multiple ratings or tooth counts, create separate approval and inventory records for each physical version.

300N10464 Starter Motor Wholesale Receiving Inspection for Wholesale Supply

Inspect incoming 300N10464 lots against the signed sample and purchase-line specification. Check rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, record the result by lot and quarantine any mixed version before it reaches saleable inventory. This prevents a low-cost receiving shortcut from becoming a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours.

300N10464 Starter Motor MOQ and Private-Label Supply for Distributor Sourcing

300N10464 Starter Motor Distributor FAQ for Bulk Procurement

How should 300N10464 cross-references be controlled in a B2B order?

Use 300N10464 as the control reference and compare the complete group 300N10464 / 4280007360 / 504357253 / 87750408. A cross-reference narrows the candidate, but it does not prove that every suffix has the same rating or mounting. Keep the removed-unit label, drive-end photograph, mounting-face view and rear-terminal view in the approval file, then connect that evidence to one quotation and purchase line so repeat orders remain traceable.

What engine or equipment data is required for 300N10464?

Confirm the complete 300N10464 / 4280007360 / 504357253 / 87750408 group together with the 12V, 232kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

Why must 12V, 232kW and 10T be checked together on 300N10464?

Confirm the complete 300N10464 / 4280007360 / 504357253 / 87750408 group together with the 12V, 232kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

What must be approved before volume supply for 300N10464?

Confirm the complete 300N10464 / 4280007360 / 504357253 / 87750408 group together with the 12V, 232kW, 10-tooth clockwise configuration. Similar appearance or a shared partial number is not enough; compare tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation against the removed unit or approved sample and keep the signed sample with the purchase record.

How can a buyer prevent a bolt-up mismatch on 300N10464?

Compare the tractor or machine model, engine plate, bell-housing pattern, pinion reach and terminal orientation with the removed starter. Check bolt-hole spacing, locating diameter, starter clocking, pinion rest position and rear-terminal clearance instead of judging from the outer housing alone. Never pull a misaligned unit into place with mounting bolts. A measured or photographed fitment record is especially valuable when nearby references share the same voltage and tooth count but use another drive-end or solenoid orientation.

How should a wholesale shipment of 300N10464 starters be inspected?

Tie every carton and sampled unit to 300N10464, the approved cross-reference set and the supplier lot. Inspect rating label, tooth count, mounting face, corrosion protection, terminals and lot marking, then measure and compare the sampled unit with the signed photos or dimensional record. Record pass and fail quantities before the stock is mixed. Quarantine any different rating, pinion, mounting face or terminal layout, because a wrong starter during planting or harvest can cost far more than the unit price in lost operating hours. This receiving discipline is cheaper than sorting returns after distribution.

When is a cross-referenced substitute acceptable for 300N10464?

A substitute is acceptable only when its complete OE relationship, 12V system, 232kW rating, 10T, rotation and mounting geometry agree with the approved unit. Similar appearance or a shared partial number is not enough. Ask for application and old-unit details, then test or approve a sample before changing the purchase line. Keep materially different versions separate in inventory so warehouse staff cannot fulfil one inquiry with the wrong variant.

Which system checks should precede a 300N10464 warranty claim?

Check battery load condition, ground path, safety-start circuit, cable drop and ring-gear wear before condemning the starter. Record battery voltage at rest and during the start command, then measure voltage drop under load; a weak supply or poor ground can imitate starter failure. Inspect the mounting surface and gear engagement as well. Attach these results, the old-unit label and failure symptoms to the claim so the supplier can distinguish a product defect from an upstream electrical or mechanical problem.

What information is needed for a 300N10464 wholesale quotation?

Send 300N10464 and all visible OE numbers, the full application or engine record, required quantity, destination and target delivery date. Add clear photos of the label, drive end, mounting face and terminals, plus any dimensional drawing available. State packaging, private-label, sample and inspection requirements at the start. A technically complete RFQ lets the supplier quote one verified configuration and reduces clarification delays after price approval.

Request a B2B Quote for 300N10464 Starter Motors

Send the complete reference, New Holland vehicles and equipment cross-referenced to 300N10464, old-unit photos, quantity, destination and packaging or inspection requirements. Elecdura will use that evidence to review one defined aftermarket starter configuration for your quotation.