S0249 Iveco EuroTech 179E27 Starter Motor Wholesale

S0249 Starter Motor Fleet Replacement Supply for Iveco 8360.46.417 and EuroTech 179E27

S0249 supports Iveco 8360.46.417 and EuroTech 179E27 sourcing where buyers need a defined electrical and drive-end match. Its 24V, 4.0kW, 10T CW specification must remain linked to the 24V 4.0kW 10T module-3.175 catalog configuration; a visually related unit may belong on a different RFQ line.

Before comparing S0249 prices, state whether the request covers an initial sample, urgent breakdown demand or routine distributor replenishment. Include the full OE reference, application, photographs, quantity and destination so the offer remains connected to the physical unit the customer expects to receive.

S0249 Starter Motor Technical Data for Fleet Parts Buyers

A warehouse can confirm the S0249 interface without dismantling the unit. Measure Ø89 mm locating diameter and Ø127 mm mounting-hole circle, inspect 3 mounting holes shown as 11, 11, 11 mm, then verify the 22 mm drive-end distance. Photograph the pinion and terminal side so workshop staff can review details that a carton label cannot show.

For S0249, count the 10T pinion and confirm module 3.175, CW rotation, 24V and 4.0kW. The terminal side and solenoid clearance must also agree with the installation. A different pinion or cable position should be quoted separately, even when major cross-references overlap.

S0249 Starter Motor Reference Matching for B2B Quotations

The S0249 cross-reference group includes S0249, 113293, 0001368082, 0986017880, 11131086, 72735957, MS329. Use these numbers to search supplier systems, then confirm 24V, 4.0kW, 10T, CW, mounting geometry and terminals.

For S0249, list and photograph each complete reference when pinions, drive positions or connectors differ. Elecdura can quote each physical starter independently.

S0249 Starter Motor Wholesale Supply and Export Planning

Wholesale planning for S0249 can cover a sample stage, routine replenishment and urgent service demand. Elecdura normally works from 20 pieces, confirms a 7–15 day lead time after order approval and provides an 18-month warranty under the agreed commercial terms.

Confirm the 8360.46.417 engine or 179E27 truck record and 10T drive. Once that boundary is fixed, purchasing can separate urgent units from routine replenishment and define branch quantities, stock labels and freight timing without encouraging an unverified substitute.

The video introduces Elecdura starter-motor assembly and electrical testing for B2B supply programs. Selection of S0249 remains tied to the stated Iveco 8360.46.417 and EuroTech 179E27 application, 10T drive, mounting interface and terminals, while the video helps distributor teams review production and testing capability.

S0249 Starter Motor Questions from Commercial Buyers

How should a buyer request samples and bulk pricing for S0249 in an Iveco EuroTech 179E27 workshop sourcing program?

Provide the full reference and application, not only a broad brand name. Attach front, side and terminal views of the removed starter and state quantity, destination, required date and packaging needs. For S0249, Elecdura will respond with the matching specification, MOQ, availability, commercial terms and freight choices.

How should buyers use the S0249 cross-reference group in an Iveco EuroTech 179E27 workshop sourcing program?

A number match narrows the search but does not finish it. For S0249, compare the stated application, electrical output, 10T drive, mounting geometry and terminal side. Buyers handling several references should list each complete number separately, allowing any genuinely different unit to receive its own offer and sample check.

What fitment evidence makes a quotation for S0249 reliable during workshop sourcing?

Use the full old-unit number and Iveco 8360.46.417 and EuroTech 179E27 record. Compare the 10T pinion, 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and terminal side. Reject a candidate when its drive position, mounting face or cable connection differs.

What pre-installation circuit review supports replacement with S0249 during an Iveco EuroTech 179E27 workshop diagnosis?

Record battery voltage at rest and during the start attempt, then test both main cables under load. Check grounds, terminal tightness and the control feed to the solenoid. Supplying those readings with an enquiry for S0249 helps the workshop avoid replacing a sound starter when the actual fault is elsewhere.

What should be measured on the drive end before releasing S0249 to stock during an Iveco EuroTech 179E27 workshop inspection?

For S0249, check 3 mounting holes shown as 11, 11, 11 mm, Ø89 mm locating diameter and 22 mm drive-end distance. Record the 10T pinion, rotation and terminal position so the warehouse can isolate a mixed or incorrectly labelled unit before dispatch.

What should an importer include in the replenishment forecast for S0249 in an Iveco EuroTech 179E27 workshop program?

Build the forecast around actual equipment counts, failure history and the time needed to replenish each service location. For S0249, keep the specified pinion and mounting interface visible in the stock record. This reduces emergency substitutions and gives purchasing a clearer basis for MOQ, packing and delivery discussions.

What should a warehouse inspect when S0249 starter motors arrive during an Iveco EuroTech 179E27 workshop receiving check?

For S0249, match carton and product labels to the purchase order, then sample 24V, 10T, 3 mounting holes shown as 11, 11, 11 mm and terminal protection. Check the flange and pinion for shipping damage. Record lot numbers and arrival photographs, and isolate any different configuration before it is placed in saleable stock.

What traceability details should accompany a warranty enquiry for S0249 in an Iveco EuroTech 179E27 workshop review?

Keep the carton or product traceability code and note when and where S0249 was installed. A review should include symptoms, operating time, old and replacement-unit photographs, cable and battery readings and any ring-gear observations. Complete records allow technical support to respond without repeated requests for basic information.

S0249 Request Starter Motor Wholesale Pricing

A complete RFQ for S0249 should state the application, removed-unit number, physical photographs, quantity, destination and delivery target. Send these details to info@elecdurauto.com for a direct response on the correct 24V 4.0kW 10T CW starter, MOQ, packaging, warranty and shipping choices.